No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


E9000 Server V100R001 User Guide 24

This document describes the overview, functions, structure, installation, and configuration methods of the E9000.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing Fan Modules

Installing Fan Modules

During operations, wear protective gloves to prevent personal injury.


  1. Determine the slots for installing the fan modules.

    A maximum of 14 fan modules can be installed in an E9000 chassis. Figure 3-17 shows the slot numbers of fan modules.
    Figure 3-17 Slot numbers of fan modules

  2. Install fan modules.

    1. Align the fan module with the slot, and make sure that the indicators on the module are on the same side as those shown in the identifier on the air baffle.
      Figure 3-18 Identifier on the air baffle
    2. Horizontally insert the fan module into the chassis until the fan module snaps into the chassis.
      Figure 3-19 Installing a fan module
    3. Repeat 1 and 2 to install other fan modules.

Updated: 2019-08-30

Document ID: EDOC1000015897

Views: 95224

Downloads: 5262

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next