No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


E9000 Server V100R001 User Guide 24

This document describes the overview, functions, structure, installation, and configuration methods of the E9000.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Compute Nodes

Configuring Compute Nodes

After installing the compute nodes, configure them to support upper-layer services.

Configuration Process

  1. Check the compute nodes.

    • Query the compute node versions and verify that the versions are the required ones.
    • Check for alarms about the compute nodes.

  2. Change the default password for a BMC user.
  3. Configure the BMC IP address.
  4. Change the BMC U-Boot password.
  5. Log in to the real-time desktop.

    Log in to the MM910 WebUI, and then log in to the real-time desktop of the compute node in remote control mode.

  6. Configure the RAID controller cards.

    The compute nodes support the LSI SAS2308 and LSI SAS2208 RAID controller cards.

  7. Set the BIOS.

    Configure the compute node BIOS, including the boot mode, Preboot Execution Environment (PXE) options of the network interface card (NIC), and BIOS password.

  8. Install the OS.

For details about how to configure a compute node, see the compute node user guide on the Support > Intelligent Servers.

Updated: 2019-08-30

Document ID: EDOC1000015897

Views: 96110

Downloads: 5270

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next