No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


E9000 Server V100R001 User Guide 24

This document describes the overview, functions, structure, installation, and configuration methods of the E9000.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Restoring the FC Configuration File

Restoring the FC Configuration File

This section is applicable only to the FC planes of the CX911, CX912, CX915, CX916, CX210, and CX220, and the FCoE gateway of the CX311.


  1. Restore the FC plane configuration file of the CX911, CX912, CX915, CX916, CX210, or CX220, or the FCoE gateway configuration file of the CX311. If no configuration file is backed up, reconfigure parameters based on customer services. For details, see "Restoring the MXxxx Configuration File by Using Web Tools" or "Restoring the Configuration File" in the CXxxx Switch Module User Guide. You can obtain the CXxxx Switch Module User Guide at Support > Intelligent Servers > Blade Servers > E9000 Chassis.
  2. For the CX912, CX916, CX210, or CX220 switch module, transfer the licenses to the new switch module. For details, see "Transferring Licenses" in the CXxxx Switch Module User Guide.
Updated: 2019-08-30

Document ID: EDOC1000015897

Views: 96366

Downloads: 5270

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next