No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MM910 Management Module V100R001 User Guide 24

This document provides the product description, installation and configuration methods, and common operations of the E9000 server chassis management module MM910.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
KVM Connection Failed

KVM Connection Failed

Symptom

A connection failure is displayed after the centralized KVM page is opened.

Possible Causes

The port (2198 or 2200) used for the remote KVM function is blocked by the firewall.

  • If port 2198 is blocked, the connection failure message is displayed.
  • If port 2200 is blocked, the "Connect blade fail, the blade IP is xxx.xxx.xx.xx" is displayed.

Solution

Enable ports 2198 and 2200 on the firewall.

Translation
Download
Updated: 2019-04-10

Document ID: EDOC1000015900

Views: 70926

Downloads: 5175

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next