No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MM910 Management Module V100R001 User Guide 24

This document provides the product description, installation and configuration methods, and common operations of the E9000 server chassis management module MM910.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
KVM and VMM Unavailable on the HMM WebUI Accessed Using an IPv6 Address

KVM and VMM Unavailable on the HMM WebUI Accessed Using an IPv6 Address

Symptom

The KVM and VMM functions are unavailable after a user logs in to the HMM WebUI using an IPv6 address.

Possible Causes

The KVM and VMM functions are implemented by the port forwarding function of the ip6tables tool, which is supported only by Linux kernel version 3.7 or later. However, the Linux kernel of Wind_River_Linux-4.3 used by the HMM WebUI is 2.6.34, which does not support port forwarding of the ip6tables tool.
NOTE:
  • ip6tables is a tool used to support IPv6 on Linux.
  • The port forwarding parameter of ip6tables is -t nat.

Solution

Use an IPv4 address to log in to the HMM Web.

Translation
Download
Updated: 2019-04-10

Document ID: EDOC1000015900

Views: 78957

Downloads: 5195

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next