No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


MM910 Management Module V100R001 User Guide 24

This document provides the product description, installation and configuration methods, and common operations of the E9000 server chassis management module MM910.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Alarm Simulation

Alarm Simulation



On the Alarm Simulation page, you can simulate the generation and clearance of component alarms, to check whether the network management system can detect the E9000 hardware health status and operating status.

Table 7-78 Parameter description



Part type

Specifies the part type for which you want to simulate an alarm.


Specifies the specific part for which you want to simulate an alarm.

Alarm type

Specifies the type of alarm you want to simulate.

Event type

  • Generate alarm: indicates that an alarm will be generated.
  • Clear alarm: indicates that an alarm will be cleared.


  • Send Trap: Send an alarm as trap packets to the network management system in event code or OID mode.
  • Send Email: Send an alarm to a target email address.
Updated: 2019-04-10

Document ID: EDOC1000015900

Views: 80902

Downloads: 5202

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next