No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MM910 Management Module V100R001 User Guide 24

This document provides the product description, installation and configuration methods, and common operations of the E9000 server chassis management module MM910.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding Users

Adding Users

Scenarios

Add users on the active MM910. The new users can then log in to the MM910 and perform routine maintenance.

You can add users through the HMM WebUI or CLI. The following describes how to use the HMM WebUI to add a user and grant operation permissions to the user. For details about how to add a user through the MM910 CLI, see MM910 Management Module V100R001 Command Reference.

Prerequisites

Conditions

None.

Data

Table 4-7 describes the data that you need to obtain before performing this task.

Table 4-7 Required data

Parameter

Description

Value Example

username

-

user

password

The MM910 user password is case-sensitive and must meet the following requirements:

  • Contain 8 to 32 characters.
  • Contain a space or one of the following special characters:

    `~!@#$%^&*()-_=+\|[{}];:'",<.>/?

  • Contain at least two types of the following characters:
    • Uppercase letters A to Z
    • Lowercase letters a to z
    • Digits 0 to 9
  • Cannot be the same as the user name or the user name in reverse order.

Huawei12#$

Procedure

  1. Log in to the WebUI of the active MM910.

    For details, see Logging In to the MM910 WebUI.

  2. Choose System Management > Account Management > MM Users.

    The user management page is displayed, as shown in Figure 4-13.

    Figure 4-13 MM Users

  3. In the User Management area, click Add.

    The Add User dialog box is displayed, as shown in Figure 4-14.

    Figure 4-14 Add User dialog box

  4. Set the parameters.

    Table 4-8 MM910 user parameters

    Parameter

    Description

    Current user password

    Password of the user who has logged in to the MM910 WebUI. You can view the user name in the upper right corner of the page.

    NOTE:

    If an incorrect password is entered for a specified number of times, the current user will be logged out.

    User name

    Name of the user to be added.

    The user name must meet the following requirements:

    • The value cannot exceed 31 characters.
    • The following characters are allowed:
      • Lowercase letters a to z
      • Uppercase letters A to Z
      • Digits 0 to 9
      • Special characters _-.$
    • The user name cannot start with hyphen (-) or dollar sign ($).
    • The dollar sign ($) can only be the last character of the user name if used.

    Domain

    Domain to which the new user belongs.

    The user has the permission to manage the components in the assigned domain. Only the system administrator is authorized to assign a domain for a new user.

    Role

    User group to which the new user belongs.

    The MM910 supports a maximum of 64 users. The users can be classified into the following user groups by role:

    • Administrator: Users in this group can perform all operations.
    • Operator: Users in this group can query and set data, but cannot perform advanced operations, such as stateless computing, user management, security management, information collection, and master/slave-chassis management.
    • Common user: Users in this group can query information and change their own passwords.

    Login interfaces

    Interfaces over which the user can access the system. The following interfaces are supported:

    • Web: A user can use a web browser to access the system.
    • SNMP: A user can access the system over SNMP.
    • SFTP: A user can access the system over SFTP.
    • SSH/TELNET: A user can access the system over SSH or TELNET. SSH supports IPv4 and IPv6.
    • KVM: A user can access the KVM.
    • REDFISH: A user can access the system over Redfish.

    By default, no interface type is selected.

    NOTE:
    • When SSH/TELNET or SNMP is selected, SFTP is selected by default. If you deselect SFTP, "The function of uploading downloaded files cannot be used" will be displayed.
    • You cannot select only SFTP. If you select only SFTP, "Select SSH/TELNET or SNMP" will be displayed.

    Login rules

    Rules for user login.

    For details, see System Management > System Settings > Security.

    NOTE:

    A user who complies with one of the login rules can log in to the MM910 WebUI or CLI.

    New password

    Password of the user to be added.

    The password varies depending on whether password complexity check is enabled.

    • If password complexity check is disabled, the password must be a string of 8 to 32 characters.
    • If password complexity check is enabled, the password must meet the following requirements:
      • Contain 8 to 32 characters.
      • Contain a space or one of the following special characters:

        `~!@#$%^&*()-_=+\|[{}];:'",<.>/?

      • Contain at least two types of the following characters:
      • Uppercase letters A to Z
      • Lowercase letters a to z
      • Digits 0 to 9
      • Cannot be the same as the user name or the user name in reverse order.
    NOTE:
    • The password complexity check is enabled by default.
    • For security purposes, do not disable the password complexity check.

    Confirm password

    Password entered again for confirmation.

    Password validity (days)

    Validity period (in days) of the password.

    Value range: 0 to 365. The value 0 indicates that the password never expires.

    Default value: 180

    NOTE:

    When a user password is about to expire in 9 days or less, the system automatically reminds the user to change the password.

    Emergency login user

    A user who can log in to the HMM WebUI irrespective of the password validity period or login rules.

    The user can log in to the MM910 WebUI in case of emergency.

    Default value: root

    NOTE:

    An emergency login user must be an administrator.

  5. Click OK.
Translation
Download
Updated: 2019-04-10

Document ID: EDOC1000015900

Views: 79102

Downloads: 5195

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next