No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

E9000 Server V100R001 HMM Alarm Handling 19

This document describes E9000 server alarms in terms of the meaning, impact on the system, possible causes, and solutions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Swi: PIC Card Fault (Major, PICN Status)

Swi: PIC Card Fault (Major, PICN Status)

Description

Alarm message:

Fault status

or

PIC card arg1 is fault.

This alarm is generated when the PIC card is faulty.

This alarm is generated by the following sensors:

PICN Status

Attribute

Alarm ID

Alarm Severity

Auto Clear

0x2100FFFF

Major

Yes

Parameters

Name

Meaning

arg1, N

Slot number of the PIC card.

Impact on the System

The PIC card cannot work.

Possible Causes

The PIC card is faulty

Procedure

  1. Reinstall the PIC card. Then, check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to 2.

  2. Replace the PIC card. Then, check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to 3.

  3. On the HMM WebUI, choose System Management > Information Collection, and collect logs.
  4. Contact Huawei technical support.
Translation
Download
Updated: 2018-08-16

Document ID: EDOC1000015902

Views: 207889

Downloads: 1590

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next