No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


E9000 Server V100R001 HMM Alarm Handling 19

This document describes E9000 server alarms in terms of the meaning, impact on the system, possible causes, and solutions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Swi: Earlier HMM Version (Major, HMM Ver. Low)

Swi: Earlier HMM Version (Major, HMM Ver. Low)


Alarm message:

An earlier version of HMM is used.


Firmware or software incompatibility detected 

This alarm is generated when the system detects that an earlier version of the HMM is used.

This alarm is generated by the following sensor:

HMM Ver. Low


Alarm ID

Alarm Severity

Auto Clear




Impact on the System

PID tuning of V5 switch modules is affected.

Possible Causes

The HMM version is not the latest version.


  1. Upgrade the HMM to the latest version. Then, check whether the alarm is cleared.

    • If yes, no further action is required.
    • If no, go to 2.

  2. On the HMM WebUI, choose System Management > Information Collection, and collect logs.
  3. Contact Huawei technical support.
Updated: 2018-08-16

Document ID: EDOC1000015902

Views: 210914

Downloads: 1591

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next