No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

E9000 Server V100R001 HMM Alarm Handling 19

This document describes E9000 server alarms in terms of the meaning, impact on the system, possible causes, and solutions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying Alarm Information

Querying Alarm Information

Alarms of E9000 components are reported to the MM910. You can query alarms of the E9000 server on the HMM CLI and WebUI.

Querying Alarms on the MM910 CLI

  1. Log in to the MM910 CLI.

    For details, see the MM910 User Guide.

  2. Run the sel command to query event information.

    The sel command is used to query log information about the E9000 components.

    To Query Event Information of…

    Run …

    Management module

    smmget [ -l smm ] -d sel

    compute node

    smmget -l bladeN -d sel

    switch module

    smmget -l swiN -d sel

    fan module

    smmget -l pem -d sel

    PSU

    smmget -l fantray -d sel

    Example:

    root@SMM:/# smmget -l blade8 -d sel  
    Please Wait...  
    The number of sel:1  
    The detailed content: 
    
    1: Wed Apr 25 11:35:09 2018
    Inlet Temp:  The air inlet temperature (17.000 degrees C) exceeds the overtemperature threshold (9.000 degrees C).Event Code:0X0147FF01,Severity:Assertion [Minor]

Querying Alarms on the HMM WebUI

  1. Log in to the MM910 WebUI.

    For details, see the MM910 User Guide.

  2. Choose System Management > Log Information > System Logs, and click the System Logs tab.

    The log information generated is displayed.

    Figure 3-1 System Logs

Translation
Download
Updated: 2018-08-16

Document ID: EDOC1000015902

Views: 195299

Downloads: 1569

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next