No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

E9000 Server V100R001 HMM Alarm Handling 19

This document describes E9000 server alarms in terms of the meaning, impact on the system, possible causes, and solutions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FCOE

FCOE

FCOE_1.3.6.1.4.1.2011.5.25.303.2.1 hwFCoEPortLoseVlan

Description

The FCoE VLAN that it is configured in the interface is not same as the VLAN in the packet. (interface name = [IfName], VLAN = [vlanId])

The FCoE VLAN configured on the interface differed from that assigned by the FCF.

Attribute

Attribute

Description

Trap OID

1.3.6.1.4.1.2011.5.25.303.2.1

Trap severity

Warning

Parameters

Name

Meaning

interface name

Indicates the name of the interface.

VLAN

Indicates the ID of the FCoE VLAN.

Impact on the System

FCoE virtual links fails to be established, and FCoE traffic cannot be forwarded correctly.

Possible Causes

Cause 1: The configurations were incorrect.

Cause 2: The FCF assigned invalid FCoE VLANs.

Procedure
  • Cause 1: The configurations were incorrect.
    1. Run the display vlan [ vlan-id [ verbose ] ] command to check whether the interface is added to the FCoE VLAN.
      • If not, run the port trunk allow-pass vlan { { vlan-id1 [ to vlan-id2 ] } &<1-10> | all } command on the interface that reported the alarm or run the port hybrid tagged vlan { { vlan-id1 [ to vlan-id2 ] }&<1-10> | all } command to add the interface to the FCoE VLAN.
      • If so, go to step 2.
    2. Collect traps, logs, and configurations, and contact Huawei technical support engineers.
  • Cause 2: The FCF assigned invalid FCoE VLANs.

    Collect traps, logs, and configurations, and contact Huawei technical support engineers.

FCOE_1.3.6.1.4.1.2011.5.25.303.2.2 hwFCoEVLanError

Description

A FIP VLAN notification packet is received on the interface, that the VLAN in the packet is not a FCoE VLAN. (interface name = [IfName], VLAN = [vlanId])

The FCoE VLAN assigned by the FCF differed from that configured on the device.

Attribute

Attribute

Description

Trap OID

1.3.6.1.4.1.2011.5.25.303.2.2

Trap severity

Warning

Parameters

Name

Meaning

interface name

Indicates the name of the interface.

VLAN

Indicates the ID of the FCoE VLAN.

Impact on the System

FCoE virtual links fails to be established, and FCoE traffic cannot be forwarded correctly.

Possible Causes

Cause 1: The configurations were incorrect.

Cause 2: The FCF assigned invalid FCoE VLANs.

Procedure
  • Cause 1: The configurations were incorrect.
    1. Run the display fcoe vlan [ vlan-id ] command to check whether the FCoE VLAN assigned by the FCF has been configured on the device.
      • If not, run the vlan vlan-id command in the FC instance view to add the FCoE VLAN to the FC instance.
      • If so, go to step 2.
    2. Collect traps, logs, and configurations, and contact Huawei technical support engineers.
  • Cause 2: The FCF assigned invalid FCoE VLANs.

    Collect traps, logs, and configurations, and contact Huawei technical support engineers.

Translation
Download
Updated: 2018-08-16

Document ID: EDOC1000015902

Views: 210912

Downloads: 1591

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next