No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

E9000 Server V100R001 HMM Alarm Handling 19

This document describes E9000 server alarms in terms of the meaning, impact on the system, possible causes, and solutions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LLDP

LLDP

LLDP 1.0.8802.1.1.2.0.0.1 lldpRemTablesChange

Description

Neighbor information is changed. (LldpStatsRemTablesInserts=[INTEGER], LldpStatsRemTablesDeletes=[INTEGER], LldpStatsRemTablesDrops=[INTEGER], LldpStatsRemTablesAgeouts=[INTEGER])

Neighbor information is changed.

Attributes

Attribute

Description

Trap OID

1.0.8802.1.1.2.0.0.1

Trap severity

Warning

Parameters

Parameter

Description

LldpStatsRemTablesInserts

Indicates the number of new neighbors.

LldpStatsRemTablesDeletes

Indicates the number of neighbors that are deleted.

LldpStatsRemTablesDrops

Indicates the number of neighbors that are discarded.

LldpStatsRemTablesAgeouts

Indicates the number of neighbors that are aged.

Impact on the System

None.

Possible Causes
  • Cause 1: A neighbor is found.
  • Cause 2: A neighbor is deleted.
  • Cause 3: A neighbor is discarded because of insufficient space.
  • Cause 4: A neighbor is aged.
Procedure
  • Cause 1: A neighbor is found.
    1. Check whether LLDP is enabled on the neighbor.
      • If LLDP is enabled, this log message is informational only, and no action is required.
      • LLDP is not enabled, go to Step 2.
    2. Collect information about configurations, trap messages, and log messages, and then contact Huawei technical support personnel.
  • Cause 2: A neighbor is deleted.
    1. Check whether LLDP is disabled on the neighbor.
      • If LLDP is disabled, run the lldp enable (system view) command on the neighbor.
      • If LLDP is not disabled, go to Step 2.
    2. Check whether the link between the neighbor and local device is faulty.
      • If the link is faulty, rectify the fault.
      • If the link is normal, go to Step 3.
    3. Collect information about configurations, trap messages, and log messages, and then contact Huawei technical support personnel.
  • Cause 3: A neighbor is discarded because of insufficient space.
    1. Check whether the number of neighbors stored on the local device has reached the maximum limit.
      • If the number of neighbors has reached the maximum limit, this log message is informational only, and no action is required.
      • If the number of neighbors has not reached the maximum limit, go to Step 2.
    2. Collect information about configurations, trap messages, and log messages, and then contact Huawei technical support personnel.
  • Cause 4: A neighbor is aged.
    1. Check whether neighbor information stored on the local device has timed out.
      • If neighbor information has timed out, this log message is informational only, and no action is required.
      • If neighbor information has not timed out, go to Step 2.
    2. Check whether the interfaces used to connect the neighbor to the local device are shut down.
      • If an interface is shut down, run the undo shutdown command on this interface.
      • If no interface is shut down, go to Step 3.
    3. Check the usage of CPU resources to determine whether the link between the neighbor and local device is congested.
      • If the link is congested, stop unnecessary traffic to alleviate the congestion.
      • If the link is not congested, go to Step 4.
    4. Collect information about configurations, trap messages, and log messages, and then contact Huawei technical support personnel.

LLDP 1.3.6.1.4.1.2011.5.25.134.2.6 hwLldpMdnRemTablesChange

Description

MDN Neighbor information is changed.

MDN neighbor information is changed.

Attributes

Attribute

Description

Trap OID

1.3.6.1.4.1.2011.5.25.134.2.6

Trap severity

Warning

Parameters

None.

Impact on the System

None.

Possible Causes
  • Cause 1: An MDN neighbor is found.
  • Cause 2: An MDN neighbor is deleted.
  • Cause 3: An MDN neighbor is discarded because of insufficient space.
  • Cause 4: An MDN neighbor is aged.
Procedure
  • Cause 1: An MDN neighbor is found.
    1. Check whether a new MDN neighbor is found.
      • If a new MDN neighbor is found, this log message is informational only, and no action is required.
      • If no new MDN neighbor is found, go to Step 2.
    2. Collect information about configurations, trap messages, and log messages, and contact Huawei technical support personnel.
  • Cause 2: An MDN neighbor is deleted.
    1. Check whether an MDN neighbor has been deleted.
      • If an MDN neighbor has been deleted, this log message is informational only, and no action is required.
      • If no MDN neighbor has been deleted, go to Step 2.
    2. Check whether the link between the local device and its MDN neighbor is faulty.
      • If the link is fault, rectify the fault.
      • If the link is normal, go to Step 3.
    3. Collect information about configurations, trap messages, and log messages, and contact Huawei technical support personnel.
  • Cause 3: An MDN neighbor is discarded because of insufficient space.
    1. Check whether the number of MDN neighbors stored on the local device has reached the maximum limit.
      • If the number of MDN neighbors has reached the maximum limit, this log message is informational only, and no action is required.
      • If the number of MDN neighbors has not reached the maximum limit, go to Step 2.
    2. Collect information about configurations, trap messages, and log messages, and contact Huawei technical support personnel.
  • Cause 4: An MDN neighbor is aged.
    1. Check whether the MDN neighbor information stored on the local device has timed out.
      • If the MDN neighbor information has timed out, this log message is informational only, and no action is required.
      • If the MDN neighbor information has not timed out, go to Step 2.
    2. Check whether the interfaces used to connect the MDN neighbor and local device are shut down.
      • If an interface is shut down, run the undo shutdown command on this interface.
      • If no interface is shut down, go to Step 3.
    3. Check the usage of CPU resources to determine whether the link between the MDN neighbor and local device is congested.
      • If the link is congested, stop unnecessary traffic to alleviate link congestion.
      • If the link is not congested, go to Step 4.
    4. Collect information about configurations, trap messages, and log messages, and then contact Huawei technical support personnel.
Translation
Download
Updated: 2018-08-16

Document ID: EDOC1000015902

Views: 208911

Downloads: 1591

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next