No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

E9000 Server V100R001 HMM Alarm Handling 19

This document describes E9000 server alarms in terms of the meaning, impact on the system, possible causes, and solutions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-1.3.6.1.4.1.2011.2.82.1.150.1.1.2.16 Hardware Failure

ALM-1.3.6.1.4.1.2011.2.82.1.150.1.1.2.16 Hardware Failure

Description

The hardware is faulty.

Attribute

Alarm ID

Alarm Severity

Alarm Type

1.3.6.1.4.1.2011.2.82.1.150.1.1.2.16

Major

Equipment alarm

Parameters

Name

Meaning

shelfName

Indicates the number of the chassis for which the alarm is generated.

SlotIndex

Indicates the slot number of the board for which the alarm is generated.

TrapInfo

Indicates the meaning of the alarm parameters.

Impact on the System

Services and fiber channel (FC) Port Physical Layer (PHY) chip management are affected.

Possible Causes

The hardware is faulty.

Procedure

  1. Remove and reinstall the board, and wait until the system starts properly.
  2. Check whether the alarm persists.

    • If yes, go to 3.
    • If no, no further action is required.

  3. Replace the board, and wait until the system starts properly.
  4. Check whether the alarm persists.

    • If yes, contact Huawei technical support for help or submit a fault report at http://iCare.huawei.com.
    • If no, no further action is required.

Clearing

Clear the alarm before the board is replaced.

Related Information

None

Translation
Download
Updated: 2018-08-16

Document ID: EDOC1000015902

Views: 195933

Downloads: 1571

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next