No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

E9000 Server V100R001 HMM Alarm Handling 19

This document describes E9000 server alarms in terms of the meaning, impact on the system, possible causes, and solutions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CX11x, CX31x, CX710, and CX91x Switch Module Alarms (Software Version 1.2.1.0.39 or Later)

CX11x, CX31x, CX710, and CX91x Switch Module Alarms (Software Version 1.2.1.0.39 or Later)

Version Info

Software versions supported in this chapter include:

  • 1.2.1.0.39
  • x.xx versions other than 2.23, 2.26, and 2.29. For example, 2.05.

Version Query

You can use any of the following methods to query the switch module software version:

  • Log in to the switch module CLI and run display version to query the version information. Software Version indicates the software version.
  • Log in to the MM910 WebUI, choose System Management > Firmware Upgrade > Swi, and view the software version of the switch module.
  • Find the software version number in the switch module release notes of the corresponding version.
Translation
Download
Updated: 2018-08-16

Document ID: EDOC1000015902

Views: 192387

Downloads: 1565

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next