No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

E9000 Server V100R001 HMM Alarm Handling 19

This document describes E9000 server alarms in terms of the meaning, impact on the system, possible causes, and solutions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
HUAWEI-CONFIG-MAN

HUAWEI-CONFIG-MAN

HUAWEI-CONFIG-MAN_1.3.6.1.4.1.2011.6.10.2.1 hwCfgManEventlog

Description

Configuration file changed. (LogIndex=[integer], SrcCmd=[integer], SrcData=[integer], DestData=[integer], TerUser=[DisplayString], SrcAddr=[InetAddress], ConfigChangeId=[Unsigned32], LogTime=[TimeTicks], CfgBaselineTime=[DisplayString])

The configuration file changed.

Attributes

Attribute

Description

Trap OID

1.3.6.1.4.1.2011.6.10.2.1

Trap severity

Cleared

Parameters

Parameter

Description

LogIndex

Indicates the index of an event.

SrcCmd

Indicates the source of a command.

SrcData

Indicates the source of a configuration.

DestData

Indicates the destination of a configuration.

TerUser

Indicates the terminal users during the configuration change.

SrcAddr

Indicates the source address of a command.

ConfigChangeId

Indicates the ID of a configuration change.

LogTime

Indicates the time when the configuration changes.

CfgBaselineTime

Indicates the time when the baseline version is configured.

Impact on the System

Services are not affected.

Possible Causes

This trap was triggered when you specify the configuration file to be used at the next system startup, save the current configuration file, and clear the configuration file to be activated at the next system startup.

Procedure
  • This alarm message indicates a normal situation, and no action is required.

HUAWEI-CONFIG-MAN_1.3.6.1.4.1.2011.6.10.2.2 hwCfgOperateCompletion

Description

Configuration copy. (OperationIndex=[integer], OperationType=[integer], OperationResultIndex=[integer], OptTime=[TIMETICK], OptState=[integer], OptEndTime=[TIMETICK])

The configuration was completed.

Attributes

Trap Attribute

Description

Trap OID

1.3.6.1.4.1.2011.6.10.2.2

Trap Severity

Warning

Parameters

Parameter

Description

OperationIndex

Indicates the operation index.

OperationType

Indicates the index of the operation result.

OperationResultIndex

Indicates the operation type.

OptTime

Indicates the operation time.

OptState

Indicates the operating status.

OptEndTime

Indicates the time when the operation is complete.

Impact on the System

Services are not affected.

Possible Causes

This trap was triggered when you specify the configuration file to be used at the next system startup, save the current configuration file, and clear the configuration file to be activated at the next system startup.

Procedure
  • The log is informational only, and no action is required.

HUAWEI-CONFIG-MAN_1.3.6.1.4.1.2011.6.10.2.5 hwCfgB2STransferFail

Trap Buffer Description

Failed to transfer the configuration file to [index] server [server-ip] through [transport-type] when automatically backing up the configuration.

The configuration file failed to be backed up to the server.

Trap Attribute

Trap Attribute

Description

Trap OID

1.3.6.1.4.1.2011.6.10.2.5

Trap severity

Warning

Trap Buffer Parameters

Parameter Name

Parameter Description

index

Index of the server table

server-ip

IP address of a server

transport-type

File transmission mode, including FTP, TFTP, and SFTP.

Impact on the System

If the trap was generated several times, the configurations were incorrect or the link failed.

Possible Causes
  • There is no reachable route to the server.
  • The password was incorrect.
  • The user name did not exist.
  • The path of the server did not exit.
Procedure
  1. Run the ping command to test whether the server is reachable.
  • If the server cannot be pinged, check the routing configurations between the server and device.
  • If the server can be pinged, go to step 2.
  1. Configure the device as the client and to access the server using ftp or sftp to check whether the password is correct.

    • If the access to the server fails, the password is incorrect. Run the configuration file auto-save backup-to-server command to configure a correct password.
    • If the access to the server succeeds, the password is correct. In this case, go to step 3.

  2. Check the user name configurations on the server.

    • If the user name configurations are incorrect, reconfigure them.
    • If the user name configurations are correct, go to step 4.

  3. Check the path configurations on the server.

    • If the path configurations are incorrect, reconfigure them.
    • If the path configurations are correct, go to step 5.

  4. Collect log and trap messages and contact Huawei technical support personnel.

HUAWEI-CONFIG-MAN_1.3.6.1.4.1.2011.6.10.2.6 hwCfgB2SOperate

Trap Buffer Description

Begin to back up the current configuration to the server.

The current configuration file was backed up to the server.

Trap Attribute

Trap Attribute

Description

Trap OID

1.3.6.1.4.1.2011.6.10.2.6

Trap severity

Warning

Trap Buffer Parameters

None

Impact on the System

Services are not affected.

Possible Causes

The device began to save configuration files to a specific server at a specific time.

Procedure
  • This log message is informational only, and no action is required.
Translation
Download
Updated: 2018-08-16

Document ID: EDOC1000015902

Views: 211327

Downloads: 1591

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next