No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

E9000 Server V100R001 HMM Alarm Handling 19

This document describes E9000 server alarms in terms of the meaning, impact on the system, possible causes, and solutions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
HUAWEI-DATASYNC

HUAWEI-DATASYNC

HUAWEI-DATASYNC_1.3.6.1.4.1.2011.5.25.191.3.1 hwCfgChgNotify

Description

Configure changed. (CurrentCfgChgSeqID=[integer], CfgChgSeqIDReveralCount=[integer], CfgChgTableMaxItem=[integer], CfgBaselineTime=[DisplayString])

The configurations changed.

Attributes

Attribute

Description

Trap OID

1.3.6.1.4.1.2011.5.25.191.3.1

Trap severity

Warning

Parameters

Parameter

Description

CurrentCfgChgSeqID

System configuration change ID

CfgChgSeqIDReveralCount

Count of Config sequence index reverse

CfgChgTableMaxItem

Max count of Config sequence index

CfgBaselineTime

System restoration time

Impact on the System

Services are not affected.

Possible Causes

System configurations were changed.

Procedure
  • This alarm message indicates a normal situation, and no action is required.
Translation
Download
Updated: 2018-08-16

Document ID: EDOC1000015902

Views: 195654

Downloads: 1571

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next