No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

E9000 Server V100R001 HMM Alarm Handling 19

This document describes E9000 server alarms in terms of the meaning, impact on the system, possible causes, and solutions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MPLS_LSPM

MPLS_LSPM

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.15 hwMplsTunnelChangeBw

Description

The bandwidth of the tunnel has changed .(SessionTunnelId=[SessionTunnelId], LocalLspId=[LocalLspId], IngressLsrId=[IngressLsrId], EgressLsrId=[EgressLsrId],TunnelName=[TunnelName],TunnelIfIndex=[TunnelIfIndex],TunnelPreBandwidth=[TunnelPreBandwidth],TunnelNextBandwidth=[TunnelNextBandwidth])

The trap message was sent when the bandwidth of the tunnel changed.

Attributes

Attributes

Attributes

Alarm or Event

Event

Trap Severity

Warning

Mnemonic Code

hwMplsTunnelChangeBw

Trap OID

1.3.6.1.4.1.2011.5.25.121.2.1.15

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

This is an event trap and does not involve the match trap.

Parameters

Parameter

Description

SessionTunnelId

Indicates the ID of the tunnel.

LocalLspId

Indicates the ID of the local LSP.

IngressLsrId

Indicates the ID of the ingress LSR.

EgressLsrId

Indicates the ID of the egress LSR.

TunnelName

The tunnel name.

TunnelIfIndex

The tunnel interface index.

TunnelPreBandwidth

The tunnel previous bandwidth.

TunnelNextBandwidth

The tunnel next bandwidth.

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.121.1.1.1.29

hwMplsTunnelInterfaceName

hwMplsTunnelIndex

hwMplsTunnelInstance

hwMplsTunnelIngressLSRId

hwMplsTunnelEgressLSRId

1.3.6.1.4.1.2011.5.25.121.1.1.1.17

hwMplsTunnelIfIndex

hwMplsTunnelIndex

hwMplsTunnelInstance

hwMplsTunnelIngressLSRId

hwMplsTunnelEgressLSRId

1.3.6.1.4.1.2011.5.25.121.1.1.1.18

hwMplsTunnelPreBandwidth

hwMplsTunnelIndex

hwMplsTunnelInstance

hwMplsTunnelIngressLSRId

hwMplsTunnelEgressLSRId

1.3.6.1.4.1.2011.5.25.121.1.1.1.19

hwMplsTunnelNextBandwidth

hwMplsTunnelIndex

hwMplsTunnelInstance

hwMplsTunnelIngressLSRId

hwMplsTunnelEgressLSRId

Impact on the System

Services will not be affected.

Possible Causes

The bandwidth of a specified type on the tunnel was changed.

Procedure
  • This trap message is informational only, and no action is required.

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.63 hwMplsLspThresholdExceed

Description

The lsp count exceeds the threshold. (hwMplsLspProtocol=[LspProtocol], hwMplsLspCurrentCount=[LspCurrentCount], hwMplsLspThreshold=[LspThreshold], hwMplsLspTotalCount=[LspTotalCount])

The number of LSPs exceeded the upper threshold.

Attributes

Attributes

Description

Alarm or Event

Alarm

Trap Severity

Error

Mnemonic Code

hwMplsLspThresholdExceed

Trap OID

1.3.6.1.4.1.2011.5.25.121.2.1.63

Alarm ID

0x00f10045

Alarm Type

qualityOfServiceAlarm

Raise or Clear

Raise

Match trap

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.64 hwMplsLspThresholdExceedClear

Parameters

Parameters

Description

hwMplsLspProtocol

LSP protocol type

hwMplsLspCurrentCount

Number of the current LSPs

hwMplsLspThreshold

Upper threshold of LSPs

hwMplsLspTotalCount

Upper limit of supported hwMplsLspProtocol LSPs

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.121.2.2.4

hwMplsLspProtocol

N/A

1.3.6.1.4.1.2011.5.25.121.2.2.7

hwMplsLspCurrentCount

N/A

1.3.6.1.4.1.2011.5.25.121.2.2.5

hwMplsLspThreshold

N/A

1.3.6.1.4.1.2011.5.25.121.2.2.6

hwMplsLspTotalCount

N/A

Impact on the System

The number of hwMplsLspProtocol LSPs has reached the upper threshold. If the number continues to increase, which exceeds the threshold, services will be affected.

Possible Causes

The number of the current hwMplsLspProtocol LSPs exceeded the upper threshold.

Procedure
  1. Run the display mpls lsp command to check whether unwanted hwMplsLspProtocol LSPs exist on the device.
  • If no unwanted LSPs exist, go to Step 3.
  • If unwanted LSPs exist, go to Step 2.
  1. Use methods, such as modifying a policy for establishing LSPs, to suppress the establishment of unwanted LSPs. Then, check whether the alarm is cleared.

    • If so, go to Step 4.
    • If not, go to Step 3.

  2. Contact technical support personnel.
  3. End.

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.64 hwMplsLspThresholdExceedClear

Description

The lsp count falls from the threshold.(hwMplsLspProtocol=[LspProtocol])

The total number of LSPs fell below the lower threshold.

Attributes

Attributes

Description

Alarm or Event

Alarm

Trap Severity

Error

Mnemonic Code

hwMplsLspThresholdExceedClear

Trap OID

1.3.6.1.4.1.2011.5.25.121.2.1.64

Alarm ID

0x00f10045

Alarm Type

qualityOfServiceAlarm

Raise or Clear

Clear

Match trap

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.63 hwMplsLspThresholdExceed

Parameters

Parameters

Description

hwMplsLspProtocol

LSP protocol type

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.121.2.2.4

hwMplsLspProtocol

N/A

Impact on the System

None.

Possible Causes

The number of LSPs of hwMplsLspProtocol type fell below the lower threshold.

Procedure
  • This alarm message is informational only, and no action is required.

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.65 hwMplsLspTotalCountExceed

Description

The lsp count reaches the upper limit.(hwMplsLspProtocol=[LspProtocol], hwMplsLspTotalCount=[LspTotalCount])

The total number of LSPs reached the upper limit.

Attributes

Attributes

Description

Alarm or Event

Alarm

Trap Severity

Critical

Mnemonic Code

hwMplsLspTotalCountExceed

Trap OID

1.3.6.1.4.1.2011.5.25.121.2.1.65

Alarm ID

0x00f1003e

Alarm Type

communicationsAlarm

Raise or Clear

Raise

Match trap

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.66 hwMplsLspTotalCountExceedClear

Parameters

Parameters

Description

hwMplsLspProtocol

LSP protocol type

hwMplsLspTotalCount

Upper limit of supported LSPs

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.121.2.2.4

hwMplsLspProtocol

N/A

1.3.6.1.4.1.2011.5.25.121.2.2.6

hwMplsLspTotalCount

N/A

Impact on the System

The number of hwMplsLspProtocol LSPs has reached the upper limit. If subsequent LSPs continue to be established, services of the new LSPs may be affected.

Possible Causes

The number of the current hwMplsLspProtocol LSPs reached the upper limit.

Procedure
  1. Run the display mpls lsp command to check whether unwanted hwMplsLspProtocol LSPs exist on the device.
  • If no unwanted LSPs exist, go to Step 3.
  • If unwanted LSPs exist, go to Step 2.
  1. Use methods, such as modifying a policy for establishing LSPs, to suppress the establishment of unwanted LSPs. Then, check whether the alarm is cleared.

    • If so, go to Step 4.
    • If not, go to Step 3.

  2. Contact technical support personnel.
  3. End.

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.66 hwMplsLspTotalCountExceedClear

Description

The lsp count falls from the upper limit.(hwMplsLspProtocol=[LspProtocol])

The total number of LSPs fell below 95% of the upper limit.

Attributes

Attributes

Description

Alarm or Event

Alarm

Trap Severity

Critical

Mnemonic Code

hwMplsLspTotalCountExceedClear

Trap OID

1.3.6.1.4.1.2011.5.25.121.2.1.66

Alarm ID

0x00f1003e

Alarm Type

communicationsAlarm

Raise or Clear

Clear

Match trap

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.65 hwMplsLspTotalCountExceed

Parameters

Parameters

Description

hwMplsLspProtocol

LSP protocol type

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.121.2.2.4

hwMplsLspProtocol

N/A

Impact on the System

None.

Possible Causes

The number of LSPs of hwMplsLspProtocol type fell below 95% of the upper limit.

Procedure
  • This alarm message is informational only, and no action is required.

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.67 hwMplsDynamicLabelThresholdExceed

Description

The dynamic label usage exceeds the threshold. BGP, LDP, RSVP TE, or MPLS VPN creation will be affected.( hwMplsDynamicLabelTotalCount=[DynamicLabelTotalCount], hwMplsDynamicLabelCurrentCount=[DynamicLabelCurrentCount], hwMplsDynamicLabelThresholdUpperLimit=[DynamicLabelThresholdUpperLimit], hwMplsDynamicLabelThresholdLowerLimit=[DynamicLabelThresholdLowerLimit])

Dynamic label usage reached the upper threshold. The creation of BGP, LDP, RSVP TE, or MPLS VPN will be affected.

Attributes

Attributes

Attributes

Alarm or Event

Alarm

Trap Severity

Warning

Mnemonic Code

hwMplsDynamicLabelThresholdExceed

Trap OID

1.3.6.1.4.1.2011.5.25.121.2.1.67

Alarm ID

0x00f10044

Alarm Type

qualityOfServiceAlarm

Raise or Clear

Raise

Match trap

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.68 hwMplsDynamicLabelThresholdExceedClear

Parameters

Parameters

Description

hwMplsDynamicLabelTotalCount

Total number of dynamic labels

hwMplsDynamicLabelCurrentCount

Number of dynamic labels used

hwMplsDynamicLabelThresholdUpperLimit

Upper threshold of dynamic label usage

hwMplsDynamicLabelThresholdLowerLimit

Lower threshold of dynamic label usage

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.121.3.3

hwMplsDynamicLabelTotalCount

N/A

1.3.6.1.4.1.2011.5.25.121.3.4

hwMplsDynamicLabelCurrentCount

N/A

1.3.6.1.4.1.2011.5.25.121.3.5

hwMplsDynamicLabelThresholdUpperLimit

N/A

1.3.6.1.4.1.2011.5.25.121.3.6

hwMplsDynamicLabelThresholdLowerLimit

N/A

Impact on the System

If dynamic label usage reaches a specific threshold, subsequent LSPs may fail to be established because all dynamic labels will be used.

Possible Causes

A great number of LSPs are established, and dynamic label usage reaches the upper threshold.

Procedure
  1. Run the display mpls lsp statistics command to view statistics about LDP LSPs, RSVP-TE CR-LSPs, and BGP LSPs. Re-plan the services and delete unwanted LSPs that use dynamic labels. Then check whether MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.68 hwMplsDynamicLabelThresholdExceedClear is generated.
  • If this clear alarm is generated, go to step 3.
  • If this clear alarm is not generated, go to step 2.
  1. Collect log messages and contact technical support personnel.
  2. End.

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.68 hwMplsDynamicLabelThresholdExceedClear

Description

The dynamic label usage falls from the threshold.( hwMplsDynamicLabelTotalCount=[DynamicLabelTotalCount], hwMplsDynamicLabelCurrentCount=[DynamicLabelCurrentCount], hwMplsDynamicLabelThresholdUpperLimit=[DynamicLabelThresholdUpperLimit], hwMplsDynamicLabelThresholdLowerLimit=[DynamicLabelThresholdLowerLimit])

Dynamic label usage fell below the lower threshold.

Attributes

Attributes

Description

Alarm or Event

Alarm

Trap Severity

Warning

Mnemonic Code

hwMplsDynamicLabelThresholdExceedClear

Trap OID

1.3.6.1.4.1.2011.5.25.121.2.1.68

Alarm ID

0x00f10044

Alarm Type

qualityOfServiceAlarm

Raise or Clear

Clear

Match trap

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.67 hwMplsDynamicLabelThresholdExceed

Parameters

Parameters

Description

hwMplsDynamicLabelTotalCount

Total number of dynamic labels

hwMplsDynamicLabelCurrentCount

Number of dynamic labels used

hwMplsDynamicLabelThresholdUpperLimit

Upper threshold of dynamic label usage

hwMplsDynamicLabelThresholdLowerLimit

Lower threshold of dynamic label usage

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.121.3.3

hwMplsDynamicLabelTotalCount

N/A

Impact on the System

None.

Possible Causes

Unwanted LSPs were torn down, and dynamic label usage fell below the lower threshold.

Procedure
  • This alarm message is informational only, and no action is required.

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.69 hwMplsDynamicLabelTotalCountExceed

Description

The dynamic label count reaches the upper limit.( hwMplsDynamicLabelTotalCount=[DynamicLabelTotalCount], hwMplsDynamicLabelCurrentCount=[DynamicLabelCurrentCount])

Dynamic label usage reached 100%.

Attributes

Attributes

Description

Alarm or Event

Alarm

Trap Severity

Critical

Mnemonic Code

hwMplsDynamicLabelTotalCountExceed

Trap OID

1.3.6.1.4.1.2011.5.25.121.2.1.69

Alarm ID

0x00f10033

Alarm Type

communicationsAlarm

Raise or Clear

Raise

Match trap

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.70 hwMplsDynamicLabelTotalCountExceedClear

Parameters

Parameters

Description

hwMplsDynamicLabelTotalCount

Total number of dynamic labels

hwMplsDynamicLabelCurrentCount

Number of dynamic labels used

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.121.3.3

hwMplsDynamicLabelTotalCount

N/A

1.3.6.1.4.1.2011.5.25.121.3.4

hwMplsDynamicLabelCurrentCount

N/A

Impact on the System

All dynamic labels are used, and no subsequent LSPs can be established.

Possible Causes

A great number of LSPs were established, and all dynamic labels were used.

Procedure
  1. Run the display mpls lsp statistics command to view statistics about LDP LSPs, RSVP-TE CR-LSPs, and BGP LSPs. Re-plan the services and delete unwanted LSPs that use dynamic labels. Then check whether MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.70 hwMplsDynamicLabelTotalCountExceedClear is generated.
  • If this clear alarm is generated, go to step 3.
  • If this clear alarm is not generated, go to step 2.
  1. Collect log messages and contact technical support personnel.
  2. End.

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.70 hwMplsDynamicLabelTotalCountExceedClear

Description

The dynamic label count falls from the upper limit.( hwMplsDynamicLabelTotalCount=[DynamicLabelTotalCount], hwMplsDynamicLabelCurrentCount=[DynamicLabelCurrentCount])

Dynamic label usage fell below 95%.

Attributes

Attributes

Description

Alarm or Event

Alarm

Trap Severity

Critical

Mnemonic Code

hwMplsDynamicLabelTotalCountExceedClear

Trap OID

1.3.6.1.4.1.2011.5.25.121.2.1.70

Alarm ID

0x00f10033

Alarm Type

communicationsAlarm

Raise or Clear

Clear

Match trap

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.69 hwMplsDynamicLabelTotalCountExceed

Parameters

Parameters

Description

hwMplsDynamicLabelTotalCount

Total number of dynamic labels

hwMplsDynamicLabelCurrentCount

Number of dynamic labels used

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.121.3.3

hwMplsDynamicLabelTotalCount

N/A

1.3.6.1.4.1.2011.5.25.121.3.4

hwMplsDynamicLabelCurrentCount

N/A

Impact on the System

None.

Possible Causes

Unwanted LSPs were torn down, and the system reclaimed some dynamic labels.

Procedure
  • This alarm message is informational only, and no action is required.

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.71 hwMplsResourceThresholdExceed

Description

The number of used MPLS resources exceeded the threshold. (hwMplsResourceType=[MplsResourceType], hwMplsResourceCurrentCount=[ResourceCurrentCount], hwMplsResourceThreshold=[ResourceThreshold], hwMplsResourceTotalCount=[ResourceTotalCount])

The proportion of used MPLS resources to all MPLS resources supported by a device reached the upper alarm threshold.

Attributes

Attributes

Description

Alarm or Event

Alarm

Trap Severity

Error

Mnemonic Code

hwMplsResourceThresholdExceed

Trap OID

1.3.6.1.4.1.2011.5.25.121.2.1.71

Alarm ID

0x00f10010

Alarm Type

qualityOfServiceAlarm

Raise or Clear

Raise

Match trap

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.72 hwMplsResourceThresholdExceedClear

Parameters

Parameters

Description

hwMplsResourceType

Type of MPLS resource

hwMplsResourceCurrentCount

Number of available MPLS resources

hwMplsResourceThreshold

Upper alarm threshold for MPLS resource usage

hwMplsResourceTotalCount

Maximum number of MPLS resources supported by a device

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.121.2.2.11

hwMplsResourceType

N/A

1.3.6.1.4.1.2011.5.25.121.2.2.12

hwMplsResourceCurrentCount

N/A

1.3.6.1.4.1.2011.5.25.121.2.2.13

hwMplsResourceThreshold

N/A

1.3.6.1.4.1.2011.5.25.121.2.2.14

hwMplsResourceTotalCount

N/A

Impact on the System

If new MPLS services are created after the number of existing MPLS resources of a specific type has exceeded the upper threshold, services may be affected.

Possible Causes

The number of MPLS resources of a specific type reached the upper threshold.

Procedure
  1. Check the hwMplsResourceType field and obtain the MPLS resource type.
  2. Check whether hwMplsResourceThreshold is set in a specified range.

    • If the value is within the specified range, go to Step 4.
    • If the value is out of the specified range, go to Step 3.

  3. Change the alarm threshold to be within the specified range. Then check whether the alarm is cleared.

    • If the alarm is cleared, go to Step 6.
    • If the alarm persists, go to Step 4.

  4. Delete configurations that use MPLS resources or configurations or messages that trigger MPLS resource consumption to reduce MPLS resource usage. Then check whether the alarm is cleared.

    • If the alarm is cleared, go to Step 6.
    • If the alarm persists, go to Step 5.

  5. Contact technical support personnel.
  6. End.

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.72 hwMplsResourceThresholdExceedClear

Description

The number of used MPLS resources fell below the threshold. (hwMplsResourceType=[MplsResourceType])

The proportion of used MPLS resources to all MPLS resources supported by a device fell below the lower alarm threshold.

Attributes

Attributes

Description

Alarm or Event

Alarm

Trap Severity

Error

Mnemonic Code

hwMplsResourceThresholdExceedClear

Trap OID

1.3.6.1.4.1.2011.5.25.121.2.1.72

Alarm ID

0x00f10010

Alarm Type

qualityOfServiceAlarm

Raise or Clear

Clear

Match trap

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.71 hwMplsResourceThresholdExceed

Parameters

Parameters

Description

hwMplsResourceType

Type of MPLS resource

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.121.2.2.11

hwMplsResourceType

N/A

Impact on the System

None.

Possible Causes

The proportion of used MPLS resources to all MPLS resources supported by a device fell below the lower alarm threshold.

Procedure
  • This alarm message is informational only, and no action is required.

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.73 hwMplsResourceTotalCountExceed

Description

The number of used MPLS resources reached the maximum number. (hwMplsResourceType=[ResourceType], hwMplsResourceTotalCount=[ResourceTotalCount])

The number of used MPLS resources reached the maximum number of MPLS resources supported by a device.

Attributes

Attributes

Description

Alarm or Event

Alarm

Trap Severity

Critical

Mnemonic Code

hwMplsResourceTotalCountExceed

Trap OID

1.3.6.1.4.1.2011.5.25.121.2.1.73

Alarm ID

0x00f10021

Alarm Type

communicationsAlarm

Raise or Clear

Raise

Match trap

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.74 hwMplsResourceTotalCountExceedClear

Parameters

Parameters

Description

hwMplsResourceType

Type of MPLS resource

hwMplsResourceTotalCount

Maximum number of MPLS resources supported by a device

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.121.2.2.11

hwMplsResourceType

N/A

1.3.6.1.4.1.2011.5.25.121.2.2.14

hwMplsResourceTotalCount

N/A

Impact on the System

If new MPLS services are created after the number of existing MPLS resources of a specific type has reached the maximum number, services may be affected.

Possible Causes

The number of used MPLS resources reached the maximum number of MPLS resources supported by a device.

Procedure
  1. Check the hwMplsResourceType field and obtain the MPLS resource type.
  2. Delete configurations that use MPLS resources or configurations or messages that trigger MPLS resource consumption to reduce MPLS resource usage. Then check whether the alarm is cleared.

    • If the alarm is cleared, go to Step 4.
    • If the alarm persists, go to Step 3.

  3. Contact technical support personnel.
  4. End.

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.74 hwMplsResourceTotalCountExceedClear

Description

The number of used MPLS resources fell below the maximum number. (hwMplsResourceType=[ResourceType], hwMplsResourceTotalCount=[ResourceTotalCount])

The number of used MPLS resources fell below 95% of the maximum number of MPLS resources supported by a device.

Attributes

Attributes

Description

Alarm or Event

Alarm

Trap Severity

Critical

Mnemonic Code

hwMplsResourceTotalCountExceedClear

Trap OID

1.3.6.1.4.1.2011.5.25.121.2.1.74

Alarm ID

0x00f10021

Alarm Type

communicationsAlarm

Raise or Clear

Clear

Match trap

MPLS_LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.73 hwMplsResourceTotalCountExceed

Parameters

Parameters

Description

hwMplsResourceType

Type of MPLS resource

hwMplsResourceTotalCount

Maximum number of MPLS resources supported by a device

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.121.2.2.11

hwMplsResourceType

N/A

Impact on the System

None.

Possible Causes

The number of used MPLS resources fell below 95% of the maximum number of MPLS resources supported by a device.

Procedure
  • This alarm message is informational only, and no action is required.
Translation
Download
Updated: 2018-08-16

Document ID: EDOC1000015902

Views: 196279

Downloads: 1571

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next