No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

E9000 Server V100R001 HMM Alarm Handling 19

This document describes E9000 server alarms in terms of the meaning, impact on the system, possible causes, and solutions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SNMP

SNMP

SNMP_1.3.6.1.6.3.1.1.5.1 coldStart

Description

OID [oidname] coldStart.

The device was cold started.

Attributes

Attribute

Description

Alarm or Event

Event

Trap Severity

Warning

Mnemonic Code

coldStart

Trap OID

1.3.6.1.6.3.1.1.5.1

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

This is an event trap and does not involve the match trap.

Parameters

Parameter

Description

oidname

OID name of an object

VSID

Indicates the VS identifier.

VB

VB OID

VB Name

VB Index

N/A

N/A

N/A

Impact on the System

Services are not affected.

Possible Causes

The system restarted because of power-off.

Procedure
  • The system restarted because of power-off.
    1. Check whether the power cables are installed properly.
      • If the power cables are installed properly, go to Step 2.
      • If the power cables are installed improperly, install the power cables properly.
    2. Check whether the device is restarted by the maintenance personnel.
      • If the device is restarted by the maintenance personnel, no action is required.
      • If the device is not restarted by the maintenance personnel, go to Step 3.
    3. Check whether the power supply system is working stably.
      • If the power supply system is working stably, go to Step 4.
      • If the power supply system is not working stably, contact engineers of the power supply department.
    4. Collect the alarm information, log information, and configurations, and then contact technical support personnel.

SNMP_1.3.6.1.6.3.1.1.5.2 warmStart

Description

OID [oidname] warmStart

The device was hot started.

Attributes

Attribute

Description

Alarm or Event

Event

Trap Severity

Warning

Mnemonic Code

warmStart

Trap OID

1.3.6.1.6.3.1.1.5.2

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

This is an event trap and does not involve the match trap.

Parameters

Parameter

Description

oidname

OID name of an object

VB

VB OID

VB Name

VB Index

N/A

N/A

N/A

Impact on the System

Services are not affected.

Possible Causes

Cause: The device was hot started.

Procedure
  • This trap message is informational only, and no action is required.

SNMP_1.3.6.1.6.3.1.1.5.5 authenticationFailure

Description

Failed to login through SNMP.(IPAddressType=[IPAddressType], IPAddress=[IPAddress], ReasonInfo=[ReasonInfo].)

SNMP authentication failed.

Attributes

Attribute

Description

Alarm or Event

Event

Trap Severity

Warning

Mnemonic Code

authenticationFailure

Trap OID

1.3.6.1.6.3.1.1.5.5

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

This is an event trap and does not involve the match trap.

Parameters

Parameter

Description

IPAddressType

Type of IP address:

  • 1: IPv4
  • 2: IPv6

IPAddress

User IP address

ReasonInfo

Cause of a login failure

VB

VB OID

VB Name

VB Index

N/A

N/A

N/A

Impact on the System

Services are not affected.

Possible Causes

The SNMP login failed because of an incorrect community name or user name.

Procedure
  • The log is informational only, and no action is required.

SNMP_1.3.6.1.4.1.2011.5.25.164.1.6.1 hwNmsPingTrap

Description

NMSPingTrap was sent successfully.

A test trap was sent successfully.

Attributes

Attribute

Description

Alarm or Event

Event

Trap Severity

Informational

Mnemonic Code

SNMP_1.3.6.1.4.1.2011.5.25.164.1.6.1 hwNmsPingTrap

Trap OID

1.3.6.1.4.1.2011.5.25.164.1.6.1

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

This is an event trap and does not involve the match trap.

Parameters

Parameter

Description

None

None

VB

VB OID

VB Name

VB Index

N/A

N/A

N/A

Impact on the System

Services will not be affected.

Possible Causes

A test trap was sent successfully.

Procedure
  • This trap message is informational only, and no action is required.

SNMP_1.3.6.1.4.1.2011.5.25.164.1.6.2 hwNmsHeartBeat

Description

NMSHeartbeat was sent successfully.

A heartbeat test trap was sent successfully.

Attributes

Attribute

Description

Alarm or Event

Event

Trap Severity

Informational

Mnemonic Code

hwNmsHeartBeat

Trap OID

1.3.6.1.4.1.2011.5.25.164.1.6.2

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

This is an event trap and does not involve the match trap.

Parameters

Parameter

Description

None

None

VB

VB OID

VB Name

VB Index

N/A

N/A

N/A

Impact on the System

Services will not be affected.

Possible Causes

A heartbeat test trap was sent successfully.

Procedure
  • This trap message is informational only, and no action is required.
Translation
Download
Updated: 2018-08-16

Document ID: EDOC1000015902

Views: 193101

Downloads: 1567

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next