No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

E9000 Server V100R001 HMM Alarm Handling 19

This document describes E9000 server alarms in terms of the meaning, impact on the system, possible causes, and solutions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
VBST

VBST

VBST_1.3.6.1.4.1.2011.5.25.323.2.5 hwVbstVlanNumExceeded

Description

The number of VLANs running VBST has exceeded the upper limit, and the VBST function may not take effect on some VLANs. (hwVbstMaxVlanNum=[hwVbstMaxVlanNum])

The number of VLANs running VBST has exceeded the upper limit, and the VBST function may not take effect on some VLANs.

Attribute

Attribute

Description

Alarm or Event

Alarm

Trap Severity

Warning

Mnemonic Code

hwVbstVlanNumExceeded

Trap OID

1.3.6.1.4.1.2011.5.25.323.2.5

Alarm ID

0x0a772002

Alarm Type

qualityOfServiceAlarm

Raise or Clear

Raise

Match trap

VBST_1.3.6.1.4.1.2011.5.25.323.2.6 hwVbstVlanNumResumed

Parameters

Parameter

Meaning

hwVbstMaxVlanNum

The maximum number of VLANs running VBST.

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.323.1.3

hwVbstMaxVlanNum

N/A

Impact on the System

By default, instance 0 is assigned to VLANs if they are not assigned any instances. Packet looping may occur in instance 0.

Possible Causes

Cause:The number of configured VLANs on the device exceeds the upper limit of 128.

Procedure
  • Run the display stp vlan instance command to check which VLANs have been assigned instances successfully and delete the VLANs that are not assigned any instances.

VBST_1.3.6.1.4.1.2011.5.25.323.2.6 hwVbstVlanNumResumed

Description

The number of VLANs running VBST has restored to the normal range. (hwVbstMaxVlanNum=[hwVbstMaxVlanNum])

The number of VLANs running VBST has restored to the normal range.

Attribute

Attribute

Description

Alarm or Event

Alarm

Trap Severity

Warning

Mnemonic Code

hwVbstVlanNumResumed

Trap OID

1.3.6.1.4.1.2011.5.25.323.2.6

Alarm ID

0x0a772002

Alarm Type

qualityOfServiceAlarm

Raise or Clear

Clear

Match trap

VBST_1.3.6.1.4.1.2011.5.25.323.2.5 hwVbstVlanNumExceeded

Parameters

Parameter

Meaning

hwVbstMaxVlanNum

The maximum number of VLANs running VBST.

VB

VB OID

VB Name

VB Index

1.3.6.1.4.1.2011.5.25.323.1.3

hwVbstMaxVlanNum

N/A

Impact on the System

None

Possible Causes

Cause:Instances have been allocated to all configured VLANs, and the number of instances does not exceed 95% of the upper threshold.

Procedure
  • This trap message is informational only, and no action is required.
Translation
Download
Updated: 2018-08-16

Document ID: EDOC1000015902

Views: 209243

Downloads: 1591

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next