No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

E9000 Server V100R001 HMM Alarm Handling 19

This document describes E9000 server alarms in terms of the meaning, impact on the system, possible causes, and solutions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SOCKET

SOCKET

TCP_1.3.6.1.4.1.2011.5.25.34.2.1_hwTCPMD5AuthenFail

Description

TCP MD5 authentication failed. (TcpConnLocalAddress=[TcpConnLocalAddress], TcpConnLocalPort=[TcpConnLocalPort], TcpConnRemAddress=[TcpConnRemAddress], TcpConnRemPort=[TcpConnRemPort], HwTCPProtocol=[HwTCPProtocol], HwTCPVrfName=[HwTCPVrfName])

MD5 authentication for the TCP connection failed.

Attributes

Attribute

Description

Alarm or Event

Event

Trap Severity

Warning

Mnemonic Code

hwTCPMD5AuthenFail

Trap OID

1.3.6.1.4.1.2011.5.25.34.2.1

Alarm ID

This is an event trap and does not involve alarm ID.

Alarm Type

This is an event trap and does not involve alarm type.

Raise or Clear

This is an event trap and does not involve alarm generation or clearance.

Match trap

This is an event trap and does not involve the match trap.

Parameters

Parameter

Description

TcpConnLocalAddress

IP address of the local end of a TCP connection

TcpConnLocalPort

Port number of the local end of the TCP connection

TcpConnRemAddress

Destination IP address of the TCP connection

TcpConnRemPort

Port number of the peer end of the TCP connection

HwTCPProtocol

Name of an upper layer application protocol

HwTCPVrfName

Name of virtual routing and forwarding (VRF)

VB

VB OID

VB Name

VB Index

1.3.6.1.2.1.6.13.1.2

tcpConnLocalAddress

None

1.3.6.1.2.1.6.13.1.3

tcpConnLocalPort

None

1.3.6.1.2.1.6.13.1.4

tcpConnRemAddress

None

1.3.6.1.2.1.6.13.1.5

tcpConnRemPort

None

1.3.6.1.4.1.2011.5.25.34.1.1

hwTCPProtocol

None

1.3.6.1.4.1.2011.5.25.34.1.2

hwTCPVrfName

None

Impact on the System

If a TCP connection fails to be established, the upper-layer routing protocols such as LDP or BGP cannot set up sessions.

Possible Causes

Cause 1: The MD5 passwords configured for the local and peer TCP ports did not match each other.

Cause 2: An MD5 password was configured only for one TCP port.

Procedure
  1. Run the display current-configuration command on both ends to view whether the MD5 passwords are configured for the TCP connection.
  • If an MD5 password is configured only for one TCP port, configure the same MD5 password for the end that does not have one.If MD5 authentication fails, go to Step 3.
  • If the MD5 passwords configured for the TCP ports are different, go to Step 2.
  1. Reconfigure the MD5 passwords to the same value.
  2. Collect the alarm, log, and configuration information, and contact technical support personnel.
  3. End.
Translation
Download
Updated: 2018-08-16

Document ID: EDOC1000015902

Views: 195979

Downloads: 1571

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next