Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the NQA Transmission Delay Threshold
The statistics about the test packets that exceed the threshold are displayed in the NQA test result. This provides a basis for the network administrators to analyze the operating status of the specified service.
Pre-configuration Tasks
Before configuring the NQA transmission threshold and alarm function, complete the following tasks:
- Enabling the device
- Creating the NQA test instance and configuring related parameters
Configuration Process
The configured NQA transmission threshold help you obtain the statistics about the test packet that exceed the thresholds in the test result. This improves the NQA function and provides an optional configuration for NQA test.
The alarm information can be sent to the NMS only when the routes between the device and NMS are reachable and the related configurations are completed.
Perform the following configurations on the NQA client.
