No relevant resource is found in the selected language.
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Basic NTP Functions
Configuring Basic NTP Functions
You can configure basic NTP functions to enable devices on the network to synchronize clocks.
Pre-configuration Tasks
Before the basic NTP functions are configured, complete the following task:
Configuring the network layer address and routing protocol of an interface to ensure that NTP packets can reach the destination.
Configuration Procedure
Basic NTP configuration contains the configuration of the NTP primary clock and operating mode.