No relevant resource is found in the selected language.
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Limit on the Number of Local Dynamic Sessions
Limit on the Number of Local Dynamic Sessions
Excess dynamic sessions limit the number of static sessions.
To address this problem, you can limit the number of dynamic sessions
on the device.
Prerequisites
All configurations of basic NTP functions have been completed.
Context
In both unicast client/server mode and symmetric peer
mode, command lines are used to establish a connection, which is a
static session. Dynamic sessions are established in broadcast mode and multicast
mode, so that the limit on the number of local dynamic sessions
takes effect.
The ntp-service
max-dynamic-sessions command runs without affecting
the existing NTP sessions. When the number of local dynamic NTP sessions
exceeds the maximum number, a new session cannot be established.
Procedure
Run:
system-view
The system view is displayed.
Run:
ntp-service max-dynamic-sessionsnumber
The number of local dynamic sessions that can be established
is configured.
By default, a maximum of 100 NTP dynamic sessions can be
established.
Checking the Configuration
Run the display current-configuration | include
ntp command to check the number of local dynamic sessions
that can be established.