Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Disabling LLDP on an Interface
Context
LLDP can be enabled in the system view and the interface view.
- When LLDP is enabled in the system view, LLDP is enabled on all interfaces.
- When LLDP is disabled in the system view, LLDP is disabled on all interfaces.
- An interface can send and receive LLDP packets only after LLDP is enabled in both the system view and the interface view.
- After LLDP is disabled globally, the commands for enabling and disabling LLDP on an interface do not take effect.
- If LLDP needs to be disabled on some interfaces, enable LLDP globally first, and run the undo lldp enable command on these interfaces. To re-enable LLDP on these interfaces, run the lldp enable command in the views of these interfaces.
- Only physical interfaces support LLDP. Logical interfaces such as the VLANIF and Eth-Trunk interfaces do not support LLDP.
- On an Eth-Trunk, LLDP can only be enabled on member interfaces. LLDP status of a member interface does not affect that of another.
