Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Priority Mapping on the S2700-52P-EI, S2700-52P-PWR-EI, S3700SI, and S3700EI
After priority mapping is configured, the Switch determines the queues that received packets enter and output priorities of the received packets based on packet priorities or the default 802.1p priority of the interface. By doing this, the Switch provides differentiated services.
- Configuring the Packet Priority Trusted by an Interface
- (Optional) Configuring the Interface Priority
- Configuring the Mappings Between DSCP Priorities and Other
Priorities
- Configuring the Mappings Between IP Precedences and Other Priorities
- (Optional) Configuring the Mappings Between Local Precedences
and Queues
- Checking the Configuration