Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Interface-based Traffic Policing
Context
If user traffic is not limited, continuous burst data from many users may cause network congestion. To better use network resources, you can configure traffic policing to limit the user traffic within a proper range and protect the network resources and user interests.
Procedure
- Run:
system-viewThe system view is displayed.
- Run:
interface interface-type interface-number
The interface view is displayed.
- Run:
qos lr inbound cir cir-value [ cbs cbs-value ]
Traffic policing is configured in the inbound direction on an interface.
Traffic policing cannot be configured in the inbound direction on an interface of the S2700SI or S2710SI.
The inbound traffic statistics takes effect before interface-based rate limiting. That is, you cannot check whether interface-based rate limiting takes effect according to the traffic statistics.
