Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Statistics on ACL-based Packet Filtering
Context
To recollect statistics on ACL-based packet filtering, run the following command to clear existing statistics.
The cleared statistics on ACL-based packet filtering cannot be restored. Exercise caution when you run the command.
Procedure
- Run the following commands to clear statistics about ACL-based packet filtering on the device.
- reset traffic-statistics [ vlan vlan-id | interface interface-type interface-number ] inbound [ acl { bas-acl | adv-acl | user-acl } [ rule rule-id ] ]
- reset traffic-statistics [ vlan vlan-id | interface interface-type interface-number ] inbound [ acl { acl-name | l2-acl } [ rule rule-id ] [ acl { bas-acl | adv-acl | acl-name } [ rule rule-id ] ] ]
- reset traffic-statistics { interface | vlan [ vlan-id ] } inbound
- reset traffic-statistics [ vlan vlan-id | interface interface-type interface-number ] inbound [ acl ipv6 { bas-acl | adv-acl | acl-name } [ rule rule-id ] ]
Other S2700EI models except S2700-52P-EI and S2700-52P-PWR-EI does not support user-acl.
