Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MQC Configuration
Modular QoS Command-Line Interface (MQC) allows the device to classify traffic based on rules and associate traffic of the same type with an action so that the device can provide differentiated services.
- Introduction to MQC
Modular QoS Command-Line Interface (MQC) allows the device to classify traffic of a certain type so that the device can provide the same service for packets of the same type and differentiated services for packets of different types. - Specifications
This section describes the specifications of MQC. - Configuration Notes
This section describes the configuration notes of MQC. - Configuring MQC
This section describes how to configure MQC. - Maintaining MQC
After the traffic statistics function is enabled, you can view traffic statistics to analyze forwarded and discarded packets.