Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Packet Priority Trusted by an Interface
Context
The device can only perform priority mapping based on 802.1p priorities in VLAN packets:
- The inbound interface maps 802.1p priorities of tagged packets to internal priorities based on the default mapping.
- The device adds the default 802.1p priority of the interface to untagged packets and maps the default 802.1p priority of the packets to internal priorities.
If you need to set the same trust priority on multiple interfaces, you can perform the configuration on a port group to simplify the configuration.