Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying Statistics on ACL-based Packet Filtering
Context
After ACL-based packet filtering is configured on the device, you can run the following command to view statistics on forwarded and discarded packets.
Procedure
- Run the following commands
to view statistics about ACL-based packet filtering on the device.
- display traffic-statistics [ vlan vlan-id | interface interface-type interface-number ] inbound [ acl { bas-acl | adv-acl | user-acl } [ rule rule-id ] ]
- display traffic-statistics [ vlan vlan-id | interface interface-type interface-number ] inbound [ acl { acl-name | l2-acl } [ rule rule-id ] [ acl { bas-acl | adv-acl | acl-name } [ rule rule-id ] ] ]
- display traffic-statistics { interface | vlan vlan-id } inbound
- display traffic-statistics [ vlan vlan-id | interface interface-type interface-number ] inbound [ acl ipv6 { bas-acl | adv-acl | acl-name } [ rule rule-id ] ]
Other S2700EI models except S2700-52P-EI and S2700-52P-PWR-EI does not support user-acl.
