No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CH222 Compute Node V100R001 User Guide 18

This document describes the appearance, functions, structure, and installation, removal, and configuration methods of the CH222 compute node.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Information

Default Information

This topic describes the default information used for configuring the compute nodes.

Table 4-2 provides the default information of compute nodes.

Table 4-2 Default information

User Name

User Description

Default Password

User Type

User Status

Login Method

root

A BMC user

Huawei12#$

Administrator

Enabled

Remote and local login

A user who logs in to U-Boot over a serial port.

No user name is used. This applies to all compute nodes.

Huawei12#$

Administrator

Enabled

Local login

A user who logs in to the basic input/output (BIOS) Setup menu over a serial port or KVM.

No user name is used. This applies to all compute nodes.

Huawei12#$

NOTE:
  • During system boot, you can press F5 to select a keyboard type (French or American keyboard).
  • The default BIOS password is Huawei12#$ for the French or American keyboard and is Huawei12£$ for the English keyboard.

Administrator

Enabled

Remote and local login

ftp

An FTP user who transmits files over FTP.

System account

Locked

Login prohibited

sshd

A user of the Secure Shell daemon (sshd).

The SSH protocol allows a user to remotely log in to the host execution program, implementing secure management for the host.

Huawei12#$

Administrator

Enabled

Remote and local login

nobody

An anonymous user.

The nobody account requires no special rights to allocate software processes.

System account

Locked

Login prohibited

telnetd

A user for the Telnet service.

You must enable the user.

System account

Locked

Login prohibited

NOTE:

The iBMC or iMana 200 does not have a default IP address.

Translation
Download
Updated: 2019-08-16

Document ID: EDOC1000018075

Views: 6964

Downloads: 321

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next