No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CH240 Compute Node V100R001 User Guide 19

This document describes the appearance, functions, structure, and installation, removal, and configuration methods of the CH240 compute node.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

This document describes the appearance, functions, structure, and installation, removal, and configuration methods of the CH240 compute node.

It provides guidance on how to replace internal components, configure startup options, redundant arrays of independent disks (RAIDs), and IP addresses for the integrated management modules (iMana 200s) on the server, log in to the web user interface (WebUI), and install the OS.

Intended Audience

This document is intended for:

  • Technical support engineers
  • Installation and commissioning engineers
  • Field maintenance engineers
  • System maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Issue

Date

Description

19

2019-08-12

This issue is the nineteenth official release.

18

2017-12-28

Erasing Storage Media Data is added.

17

2017-01-18

This issue is the seventeenth official release.

16

2016-08-05

This issue is the sixteenth official release.

15

2016-03-31

This issue is the fifteenth official release.

14

2015-10-19

13

2015-02-16

The table in Hardware Structure is updated.

12

2014-11-10

11

2014-09-15

  • "Tecal" is deleted from the product document.
  • Maximum power consumption and Altitude in Technical Specifications are updated.
  • Hardware Structure is updated, USB 2.0 port is added to the component figure and description.

10

2014-07-30

09

2014-05-06

Intel® Xeon® E5-4600 (IvyBridge EP 4S) is added to the CPU models supported by the CH240. All information related to this addition is updated in this document.

08

2014-02-28

  • The procedure for removing a partition board is added to Installing a CH240.
  • Configuring the BIOS is updated, and the setting screen of the BIOS is displayed without any password at the first login.

07

2014-01-01

Modified steps in Changing the Default iMana 200 User Password.

Steps for the MM910 of versions later than (U54) 2.20 are added, and the following topics are modified:

06

2013-11-18

The following topics are added to "Common Operations":

In "Checking the CH240", the method for logging in to the MM910 command-line interface (CLI) is changed from over a serial port to over a network port.

05

2013-09-30

The description of the message that prompts users to change the passwords periodically is added.

04

2013-08-30

The positions of Ports and Indicators are exchanged.

03

2013-06-01

02

2013-04-01

  • Distinguishing RAID Controller Card Chip Models is added.
  • Indicators is modified, and the PWR indicator state description is updated.
  • The contents in Configuring the CH240 are modified, and the configuration procedure is updated.
  • Removing a USB Flash Drive and Installing a USB Flash Drive are modified, and the procedures for installing and removing the mainboard involved during USB flash drive installation and removal are deleted.

01

2013-01-04

This issue is the first official release.

Translation
Download
Updated: 2019-08-16

Document ID: EDOC1000018076

Views: 8103

Downloads: 361

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next