Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Transferring Files Using WinSCP
Prerequisites
Data
- IP address of the server to be connected
- User name and password for logging in to the server to be connected
Procedure
- Enable the SFTP service on the destination device.
- Open the WinSCP folder, and double-click WinSCP.exe.
The WinSCP Login dialog box is displayed.
If the system language is not English, click Languages to set the displayed language.
Figure 6-13 WinSCP login - Set the login parameters.
Set the following parameters:
- Host name: Enter the IP address of the device to be connected, for example, 191.100.34.32.
- Port number: Retain the default value 22.
- User name: Enter the user name, for example, admin123.
- Password: Enter the password, for example, admin123.
- Private key file: Retain the default value None.
- Protocol: Retain the default value SFTP, and select Allow SCP fallback.
- Click Login.
The WinSCP file transfer page is displayed.
- If a key file was not selected during the first login, a warning Continue connecting and add host key to cache is displayed. Click Yes. The WinSCP file transfer page is displayed.
- If Windows 7 is used, in the left pane of the page, open the C:\Users\Administrator\Documents directory, the device's /root directory is opened in the right pane by default.
- Create or delete folders in the left or right pane, or copy folders between panes as required.
