No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX311 Switch Module V100R001C00 User Guide 22

This document describes the CX311 10GE / FCoE converged switch module of the Tecal E9000 server in terms of its features, installation, removal, and configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the HMM WebUI

Logging In to the HMM WebUI

Scenarios

Configure and manage the chassis, MM910s, compute nodes, switch modules, pass-through modules, power supply units (PSUs), and fan modules on the HMM WebUI.

NOTE:
  • If HMM WebUI login attempts fail for five consecutive times, the account is locked. It will be automatically unlocked after 10 minutes. If you enter a password within this time, the lock is reset to 10 minutes even if the password is correct.
  • An account can be used to log in to the HMM WebUI only through one IP address at a time. Other logins through a different IP address forcibly log out the user who has logged in using the account.
  • "This is the standby MM" is displayed for the WebUI of the standby MM910. The standby HMM WebUI does not display component installation status. On the WebUI of the standby MM910, you can only view monitoring information about the active MM910, set the DHCP and static IP addresses, and set and query the thresholds and hysteresis of the sensors of the standby MM910. To perform other operations, log in to the WebUI of the active MM910.
  • For details about the operations on the WebUI, see the Online Help.

Prerequisites

Conditions

The client (a PC) used to access the HMM WebUI must meet the requirements listed in Table 6-1.

Table 6-1 Runtime environment requirements

Runtime Environment

Version

OS

Windows

  • Windows 7 32-bit/64-bit
  • Windows 8 32-bit/64-bit
  • Windows Server 2008
  • Windows Server 2012

Linux

Red Hat Enterprise Linux (RHEL) 4.3 to 6.0

Web browser

Windows

  • Internet Explorer 9 or later
  • Mozilla Firefox 19.0 to 31.0
  • Chrome 22.0 to 31.0

Linux

Mozilla Firefox 19.0 to 31.0

JRE

  • JRE 1.6 or later if the MM910 version is earlier than (U54) 5.51
  • JRE 1.7 or later if the MM910 version is (U54) 5.51 or later

Data

User name and password for logging in to the server

Procedure

  1. Connect the Ethernet port on a PC to the MGMT port on the active or standby MM910 over a local area network (LAN).

    Figure 6-7 shows the network connections.

    Figure 6-7 Network connections
    NOTE:
    • For MM910 (U54) 2.25 or earlier, the MM910 communicates with external network devices through the ports on switch modules in slots 2X and 3X by default. For MM910 later than (U54) 2.25, the MM910 communicates with external network devices through the MGMT port by default. To query the MM910 version, see the MM910 Management Module V100R001 User Guide.
    • You can run the outportmode command to change the MM910 management network port connection mode. If the MM910 communicates with external network devices through the ports of switch modules in slots 2X and 3X, do not connect the MM910 MGMT port and the switch module ports to the same network. Otherwise, a network storm will occur and the network will be interrupted. For details, see the MM910 Management Module V100R001 Command Reference.

  2. Set an IP address and a subnet mask or add route information for the PC, and ensure that the PC can properly communicate with the MM910.
  3. Open Internet Explorer, click and choose Internet Options.

    The Internet Options dialog box is displayed.

    NOTE:

    Internet Explorer 11 in Windows 7 is used as an example.

  4. Choose Connections and click LAN Settings.

    The LAN Settings dialog box is displayed.

  5. In the Proxy server group box, deselect Use a proxy server for your LAN and click OK.

    The LAN Settings dialog box is closed.

  6. Click OK.

    The Internet Options dialog box is closed.

  7. Open Internet Explorer again, enter https://MM910 floating IP address, for example https://192.168.2.3, in the address box, and press Enter.

    NOTE:

    You can query or configure the MM910 floating IP address in any of the following ways:

    The message "There is a problem with this website's security certificate" is displayed.

  8. (Optional) Add the MM910 IP address to the Trusted sites zone.

    By default, Internet Explorer enhanced security configuration is enabled on the Windows Server series OSs. To ensure a successful login to the HMM WebUI, add the MM910 IP address to the trusted sites zone as follows:

    1. On Internet Explorer, choose Tools > Internet Options.

      The Internet Options dialog box is displayed.

    2. Click the Security tab.
    3. Click Trusted sites, and click Sites.
    4. In the Trusted sites dialog box, click Add to add the MM910 IP address to the trusted site list, and click Close.
    5. Refresh the page.
    6. In the status bar of the browser, check whether the MM910 IP address is in the Trusted sites zone.

  9. Click Continue to this website (not recommended).

    The HMM Web login page is displayed, as shown in Figure 6-8.

    Figure 6-8 Logging in to the HMM WebUI (V603)

  10. Set the login parameters.

    NOTE:

    The login page varies slightly with the HMM software version.

    • Language: Select the language to be used.
    • User name: Enter the user name. The default user name is root.
    • Password: Enter the password. The default password is Huawei12#$.

      If User must change password at next login is selected when users are created on the LDAP server, logins will fail. Deselect this option on the LDAP server.

    • Login To: Select This Machine for a local user. If the system manages domain users over Active Directory (AD), select LDAP.

  11. Click Log In.

    The HMM Web home page is displayed.

    Figure 6-9 HMM Web home page (V603)

Translation
Download
Updated: 2018-09-20

Document ID: EDOC1000018097

Views: 60367

Downloads: 3389

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next