No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX311 Switch Module V100R001C00 User Guide 22

This document describes the CX311 10GE / FCoE converged switch module of the Tecal E9000 server in terms of its features, installation, removal, and configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Using the Web Tools to Collect FCoE Gateway Information

Using the Web Tools to Collect FCoE Gateway Information


Use the Web Tools to collect information about the FCoE gateway.



Table 6-3 Required data


Example Value

IP address

Subnet mask

Default gateway

The user name for exporting the dump_support log file is images, and the default password is Huawei12#$.


  1. Ping the management IP address of the FCoE gateway to the server IP address.
  2. Log in to the Web Tools of the FCoE gateway. For details, see Logging In to the Web Tools of the MX510.
  3. On the Web Tools, choose Switch > Download Support File.

    Figure 6-16 Web Tools page

  4. Select a directory for storing the log file, and click Start.

    The log file download starts. If "Support file saved" is displayed in the Status area, the log file has been successfully exported.

    Figure 6-17 Download Support File window

Updated: 2018-09-20

Document ID: EDOC1000018097

Views: 60200

Downloads: 3389

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next