No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX311 Switch Module V100R001C00 User Guide 22

This document describes the CX311 10GE / FCoE converged switch module of the Tecal E9000 server in terms of its features, installation, removal, and configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Information

Default Information

Table 4-1 lists the default IP address of the CX311 FCoE gateway. Other switching planes and the BMC do not have default IP addresses.

Table 4-1 Default IP address

Parameter

Default Value

IP address

192.168.1.100

Subnet mask

255.255.255.0

Default gateway

0.0.0.0

Table 4-2 describes the default information of the CX311.

Table 4-2 Default information

User Name

User Description

Default Password

User Type

User Status

Login Method

root

A BMC user

Huawei12#$

Administrative user

Enabled

Remote or local login

-

A user that logs in to the basic input/output system (BIOS) setup menu.

The user has no user name.

Huawei12#$ for U.S. English or French keyboard

Huawei12£$ for UK English keyboard

NOTE:

You can press F5 during system boot to select a keyboard.

Administrative user

Enabled

Local login

root

A user that logs in to the converged switching plane.

No user name is needed for login over a serial port.

Huawei12#$

Administrative user

Enabled

Remote or local login

admin

A user that logs in to the FCoE gateway. Log in to the FCoE gateway at the first time as user admin to perform basic configuration tasks.

Huawei12#$

Administrative user

Enabled

Remote or local login

NOTE:

Switch modules have a virtual serial port COM1. The virtual serial port is used by the built-in software system in a switch module to manage the switch module. Note the following about the virtual serial port:

  • Users cannot log in to the virtual serial port.
  • The default password is Huawei#123.
  • Do not set or change the virtual serial port password. Otherwise, some switch module functions fail.
  • If the password is changed, run the undo authentication-mode or undo set authentication password command to delete the new login password.
Translation
Download
Updated: 2018-09-20

Document ID: EDOC1000018097

Views: 62260

Downloads: 3389

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next