No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX311 Switch Module V100R001C00 User Guide 22

This document describes the CX311 10GE / FCoE converged switch module of the Tecal E9000 server in terms of its features, installation, removal, and configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Transferring Files Using WinSCP

Transferring Files Using WinSCP



  • IP address of the server to be connected
  • User name and password for logging in to the server to be connected


  1. Enable the SFTP service on the destination device.
  2. Open the WinSCP folder, and double-click WinSCP.exe.

    The WinSCP Login dialog box is displayed.


    If the system language is not English, click Languages to set the displayed language.

    Figure 6-13 Logging in to WinSCP

  3. Set the login parameters.

    The parameter descriptions are displayed as follows:

    • Host name: Specifies the IP address of the device to be connected, for example,
    • Port number: The default value is 22.
    • User name: Specifies the username, for example, admin123.
    • Password: Specifies the password, for example, admin123.
    • Private key file: Retain the default value None.
    • Protocol: Retain the default value SFTP, and select Allow SCP fallback.

  4. Click Login.

    The WinSCP file transfer page is displayed.

    • If a key file was not selected during the first login, a warning Continue connecting and add host key to cache is displayed. Click Yes. The WinSCP file transfer page is displayed.
    • If Windows 7 is used, in the left pane of the page, open the C:\Users\Administrator\Documents directory, the device's /root directory is opened in the right pane by default.

  5. Create or delete folders in the left or right pane, or copy folders between panes as required.
Updated: 2018-09-20

Document ID: EDOC1000018097

Views: 62084

Downloads: 3389

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next