No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX311 Switch Module V100R001C00 User Guide 22

This document describes the CX311 10GE / FCoE converged switch module of the Tecal E9000 server in terms of its features, installation, removal, and configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Transferring Files Using SFTP

Transferring Files Using SFTP


Transfer files on the local computer using SFTP.


msftpsrvr.exe (free software)


  1. Enable the SFTP service on the destination device.
  2. Double-click msftpsrvr.exe.

    The Core FTP mini-sftp-server dialog box is displayed.

    Figure 6-14 Core FTP mini-sftp-server dialog box

  3. Set the parameters as prompted:

    The parameter descriptions are displayed as follows:

    • User: specifies the user name for logging in to the SFTP server.
    • Password: specifies the password for logging in to the SFTP server.
    • Port: specifies the port number, which is 22 by default.
    • Root path: specifies the home directory of the SFTP server.

  4. Click Options, and enter the SFTP server IP address in IP/Address, for example,
  5. Click Start.

    The file transfer starts.

Updated: 2018-09-20

Document ID: EDOC1000018097

Views: 62069

Downloads: 3389

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next