No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX311 Switch Module V100R001C00 User Guide 22

This document describes the CX311 10GE / FCoE converged switch module of the Tecal E9000 server in terms of its features, installation, removal, and configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an FTP Server

Configuring an FTP Server



wftpd32.exe: third-party free software used to transfer files between different platforms, for example, from a PC to a switching plane of a switch module.


  1. Connect a PC to the server by using a serial cable.
  2. Double-click wftpd32.exe.

    The No log file open - WFTPD window is displayed.

  3. Choose Logging > Log Options.

    The Logging Options dialog box is displayed.

  4. Select all check boxes except Winsock Calls, and click OK.
  5. Choose Security > Users/rights.

    The User / Rights Security Dialog dialog box is displayed.

  6. Click New User. In the dialog box displayed, enter a user name (for example, vxworks) and click OK.

    The Change Password dialog box is displayed.

  7. Enter a password (for example, vxworks) in the New Password and Verify Password text boxes, and click OK.
  8. Copy the upgrade file to a directory (for example, D:\FTP) on the PC.


    The directory can contain only English characters.

  9. Select vxworks from the User Name combo box, and enter the upgrade file directory (for example, D:\FTP) in the Home Directory text box.

    Figure 6-12 User / Rights Security Dialog

  10. Click Done.

    The FTP server is configured.

Updated: 2018-09-20

Document ID: EDOC1000018097

Views: 59905

Downloads: 3389

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next