No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CX311 Switch Module V100R001C00 User Guide 22

This document describes the CX311 10GE / FCoE converged switch module of the Tecal E9000 server in terms of its features, installation, removal, and configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Overview

Configuration Overview

Configuration Process

Figure 4-1 Configuration process

The converged switching plane and FCoE gateway of the CX311 must be configured respectively.

FCoE gateway refers to the MX510 in the CX311. This section describes the features supported by the FCoE gateway and common configurations such as zone configuration.

For details about FCoE gateway configuration, see the MX510 Mezzanine Module Command Reference, such as:

  • User Account Configuration
  • Managing MX510 Mezzanine Module Services
  • Installing Firmware
  • Event Log Configuration
  • Zoning Configuration
  • Port Configuration
  • Creating a Support File
  • Command Reference

Related Documents

Related documents of the converged switching plane in the CX311 are as follows:

Related documents of the FCoE gateway in the CX311 are as follows:

Updated: 2018-09-20

Document ID: EDOC1000018097

Views: 62130

Downloads: 3389

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next