No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX311 Switch Module V100R001C00 User Guide 22

This document describes the CX311 10GE / FCoE converged switch module of the Tecal E9000 server in terms of its features, installation, removal, and configuration.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Appearance

Appearance

Figure 2-1 Appearance

Installation Positions

The CX311 can be installed in the four slots at the rear of the E9000 chassis. The four slots are 1E, 2X, 3X, and 4E.

Figure 2-2 Installation positions and slots

Panel

Figure 2-3 Panel

1

Product model

2

Slide-out label plate (with an ESN label)

3

BMC serial port

4

Stacking status indicator

5

HLY indicator

6

Offline button/indicator

7

SYS serial port

8

10GE optical port

9

Connection status indicator for the 10GE optical port

10

Data transmission status indicator for the 10GE optical port

11

8G FC optical port

12

Connection status indicator for the 8G FC optical port

13

Data transmission status indicator for the 8G FC optical port

-

-

NOTE:

The numbers on the left side are port numbers. The arrow direction of a triangle indicates the direction of a port.

ESN

An Equipment Serial Number (ESN) uniquely identifies a server. An ESN is required when you apply for technical support from Huawei.

Figure 2-4 ESN example

Callout No.

Description

1

ESN ID (two characters), which is 21 by default.

2

Material identification code (eight characters), that is, processing code.

3

Vendor code (two characters). The code 10 indicates Huawei, and other values indicate outsourcing vendors.

4

Year and month (two characters).

  • The first character indicates the year, where:
    • Digits 1 to 9 indicate 2001 to 2009, respectively.
    • Letters A to H indicate 2010 to 2017, respectively.
    • Letters J to N indicate 2018 to 2022, respectively.
    • Letters P to Y indicate 2023 to 2032, respectively.
NOTE:

The years from 2010 are represented by upper-case letters excluding I, O, and Z because the three letters are similar to the digits 1, 0, and 2.

  • The second character indicates the month, where:
    • Digits 1 to 9 indicate January to September, respectively.
    • Letters A to C indicate October to December, respectively.

5

Serial number (six characters).

6

RoHS compliance (one character). Y indicates environmental protection processing.

7

Internal model, that is, product name.

Translation
Download
Updated: 2018-09-20

Document ID: EDOC1000018097

Views: 59925

Downloads: 3389

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next