No relevant resource is found in the selected language.
MENU
Support Documentation
Hardware Description (V100 and V200)
CloudEngine 9800, 8800, 7800, 6800, and 5800 Series Switches

This document provides an overall description of the CE5800&6800&7800&8800 series switches hardware, helping you obtain detailed information about each chassis, power module, fan module, card, cable, and optical module.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FAN-40EA Series Fan Modules

FAN-40EA Series Fan Modules

Version Mapping

The FAN-40EA series fan modules are classified into two types depending on the airflow designs: FAN-40EA-B (B: back-to-front airflow, air exhaust on fan module panel) and FAN-40EA-F (F: front-to-back airflow, air intake on fan module panel).

Table 4-5 describes the mapping between switch models and FAN-40EA fan modules.

Table 4-5 Version mapping

Switch Model

FAN-40EA-B

FAN-40EA-F

CE5850-48T4S2Q-EI

CE6850-48S4Q-EI

CE6850-48T4Q-EI

Supported in V100R001C00 version and later versions

Supported in V100R001C00 version and later versions

CE5850-48T4S2Q-HI

CE6810-48S4Q-EI

Supported in V100R003C00 version and later versions

Supported in V100R003C00 version and later versions

CE6810-48S4Q-LI

CE6810-48S-LI

Supported in V100R003C10 version and later versions

Supported in V100R003C10 version and later versions

CE6810-32T16S4Q-LI

CE6810-24S2Q-LI

CE6851-48S6Q-HI

Supported in V100R005C10 version and later versions

Supported in V100R005C10 version and later versions

CE6855-48S6Q-HI

Supported in V200R001C00 version and later versions

Supported in V200R001C00 version and later versions

CE6856-48S6Q-HI

Supported in V200R002C50 version and later versions

Supported in V200R002C50 version and later versions

Other models

Not supported

Not supported

Appearance

Figure 4-5 shows the appearance of a FAN-40EA-B fan module, and Figure 4-6 shows the appearance of a FAN-40EA-F fan module.

A FAN-40EA fan module consists of two fans.
Figure 4-5 FAN-40EA-B
Figure 4-6 FAN-40EA-F

Function

A FAN-40EA fan module consists of a fan tray, two fans, and a fan control unit. FAN-40EA-B and FAN-40EA-F fan modules use different airflow designs but have the same functions. Table 4-6 describes the functions of them.

Table 4-6 Functions of a FAN-40EA fan module

Function

Description

Automatic fan speed adjustment

After the fan module communicates normally with the switch, the switch controls the speed of fans based on temperature of the chassis.

Hot swap

Supported

Heat dissipation
  • FAN-40EA-B: back-to-front airflow
  • FAN-40EA-F: front-to-back airflow

Panel

Figure 4-7 and Figure 4-8 show the panels of the FAN-40EA series fan modules.

Figure 4-7 FAN-40EA-B panel
Figure 4-8 FAN-40EA-F panel

1. Captive screw
2. Airflow flag
  • : back-to-front airflow
  • : front-to-back airflow

3. Indicator

4. Handle

5. Fan air vent

 -

Table 4-7 describes the indicator on the panels of the FAN-40EA fan modules.

Table 4-7 Indicator description

Indicator

Color

Description

STATUS: fan indicator

-

Off: The fan module is not running.

Green

  • Slow blinking: The fan module is working properly and communicating normally with the system.

  • Fast blinking: The fan module is working properly but has not established communication with the system.

Red

  • Steady on: The fan module has a hardware fault and must be replaced.

  • Blinking: An alarm has been generated, and you need to handle it accordingly. Common causes of this alarm include errors of dual in-line package (DIP) switches, short circuits, fan blades blocked, and fault of the fan module.

Specifications

Table 4-8 lists technical specifications of the FAN-40EA series fan modules.

Table 4-8 Technical specifications

Item

 FAN-40EA-B FAN-40EA-F
Dimensions (W x D x H)

94.5 mm x 183.1 mm x 39.8 mm (3.72 in. x 7.21 in. x 1.57 in.)
Number of fans

2
Weight

0.325 kg (0.72 lb)

Maximum power consumption

12.71 W

Maximum fan speed

18500±10% revolutions per minute (RPM)

Maximum wind rate

46 cubic feet per minute (CFM)

Part Number

02355338

02355421
Translation
简体中文
Download
Updated: 2020-12-24

Document ID: EDOC1000019246

Views: 523987

Downloads: 8407

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next
Enterprise APP

Copyright © 2021 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :