AOC Cable

CloudEngine 8800, 7800, 6800, and 5800 Series Switches Hardware Description (Versions earlier than V200R020C00)

This document provides an overall description of the CE5800&6800&7800&8800 series switches hardware that versions earlier than V200R020C00, helping you obtain detailed information about each chassis, power module, fan module, card, cable, and pluggable modules for ports.

Rate and give feedback:

Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).

AOC Cable

Types of AOC Cables

An active optical cable (AOC) is an active optical fiber with optical modules at both ends, and therefore is easy to use. Figure 6-35, Figure 6-36, and Figure 6-37 show different types of AOC cables.

Figure 6-35 SFP+ to SFP+/SFP28 to SFP28 AOC cable

Figure 6-36 QSFP+ to QSFP+/QSFP28 to QSFP28 AOC cable

Figure 6-37 QSFP+ to 4*SFP+ AOC cable

Table 6-16 lists the attributes of various AOC cables.

Table 6-16 Attributes of AOC cables

Model	Version Support	Length	Operating Wavelength	Connector Type	Part Number	Operating Temperature
SFP-10G-AOC-3M	V100R005C00 and later versions	3 m	850 nm	SFP+ connectors at both ends	02311BKP	0°C to 70°C
SFP-10G-AOC-5M	V200R001C00 and later versions	5 m	850 nm	SFP+ connectors at both ends	02311PQS	0°C to 70°C
SFP-10G-AOC-7M	V200R001C00 and later versions	7 m	850 nm	SFP+ connectors at both ends	02311PQT	0°C to 70°C
SFP-10G-AOC10M	V100R003C10 and later versions	10 m	850 nm	SFP+ connectors at both ends	02310QWH	0°C to 70°C
SFP-10G-AOC20M	V100R003C10 and later versions	20 m	850 nm	SFP+ connectors at both ends	02310SSK	0°C to 70°C
QSFP-H40G-AOC10M	V100R005C00 and later versions	10 m	850 nm	QSFP+ connectors at both ends	02310SSH	0°C to 70°C
SFP-25G-AOC-3M	V200R001C00 and later versions	3 m	850 nm	SFP28 connectors at both ends	02311MPE	0°C to 70°C
SFP-25G-AOC-5M	V200R001C00 and later versions	5 m	850 nm	SFP28 connectors at both ends	02311MPD	0°C to 70°C
SFP-25G-AOC-7M	V200R001C00 and later versions	7 m	850 nm	SFP28 connectors at both ends	02311MPC	0°C to 70°C
SFP-25G-AOC-10M	V200R001C00 and later versions	10 m	850 nm	SFP28 connectors at both ends	02311KNT	0°C to 70°C
QSFP-4SFP10-AOC10M	V100R006C00 and later versions	10 m	850 nm	QSFP+ connector at one end and four SFP+ connectors at the other end	02310SSJ	0°C to 70°C
QSFP-100G-AOC-10M	V200R002C50 and later versions	10 m	850 nm	QSFP28 connectors at both ends	02311KNQ	0°C to 70°C
QSFP-100G-AOC-30M	V200R002C50 and later versions	30 m	850 nm	QSFP28 connectors at both ends	02311RAH	0°C to 70°C

Connection

Table 6-17 describes usage scenarios of AOC cables and cable connections in these scenarios.

Table 6-17 AOC cable usage scenarios and connections

Cable Type	Connection
SFP+ to SFP+ AOC cable	Scenario 1: used for 10GE optical port connection or stacking between CloudEngine 9800, 8800, 7800, 6800, and 5800 series switches. Scenarios 2: used for 10GE connection between and CloudEngine 9800, 8800, 7800, 6800, and 5800 series switches. Both ends connect to a 10GE optical port.
QSFP+ to QSFP+ AOC cable	Scenario 1: used for 40GE/100GE optical port connection or stacking between CloudEngine 9800, 8800, 7800, 6800, and 5800 series switches. Scenarios 2: used for 40GE/100GE optical port connection between and CloudEngine 9800, 8800, 7800, 6800, and 5800 series switches.
QSFP+ to 4*SFP+ AOC cable	When a 40GE optical port is split into four 10GE optical ports: Scenario 1: used for 10GE optical port connection or stacking between CloudEngine 9800, 8800, 7800, 6800, and 5800 series switches. Scenarios 2: used for 10GE connection between and CloudEngine 9800, 8800, 7800, 6800, and 5800 series switches. One end connects to the 40GE optical port, and the other end connects to four 10GE optical ports.
SFP28 to SFP28 AOC cable	Used for 25GE optical port connection or stacking between CloudEngine 9800, 8800, 7800, 6800, and 5800 series switches. Both ends connect to a 25GE optical port.
QSFP28 to QSFP28 AOC cable	Used for 100GE optical port connection or stacking between CloudEngine 9800, 8800, 7800, 6800, and 5800 series switches. Both ends connect to a 100GE optical port.

Translation

简体中文

Download

Updated: 2021-06-01

Document ID: EDOC1000019246

Downloads: 10126

Average rating:

This Document Applies to these Products

Related Version

Digital Signature File

Digital Signature Authentication Mode

This document provides an overall description of the CE5800&6800&7800&8800 series switches hardware that versions earlier than V200R020C00, helping you obtain detailed information about each chassis, power module, fan module, card, cable, and pluggable modules for ports.

Types of AOC Cables

Connection

Related Version

Related Documents

Digital Signature File