Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Ground Cable
Appearance and Structure
Different types of ground cables have similar appearance, except for the cross-sectional area, size of the cable lugs, and cable length. The following figure is for reference.
Figure 6-10 shows the appearance of a ground cable.
Figure 6-11 shows the structure of a ground cable.
Pin Assignments
Table 6-4 lists the pin assignments of a ground cable.
Connection
A ground cable grounds a device to protect it from lightning and electromagnetic interference. A ground cable is connected to a chassis in the following way:
- The OT6-4 naked crimping connector connects to the ground point on the chassis.
- The OT6-6 naked crimping connector connects to the ground point on the cabinet.
