Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SFP-10G-ZDWT-L
Table 7-45 Technical specifications
Item |
Description |
|---|---|
Part number |
02312DAN |
Version support |
Supported in V200R003C00 and later versions |
Transceiver form factor |
SFP+ |
Transmission speed |
10GE |
Center wavelength (nm) |
1529.16 to 1560.61 |
Standards compliance |
10G-DWDM |
Connector type |
LC |
Type of the end face of the fiber ceramic ferrule |
PC or UPC |
Applicable cable and maximum transmission distance |
Single-mode fiber (G.652) (with diameter of 9 μm): 60 km |
Modal bandwidth |
- |
Transmit power (dBm) |
-1 to +3 |
Maximum receiver sensitivity (dBm) |
-24 |
Overload power (dBm) |
-1 |
Extinction ratio (dB) |
≥ 8.2 |
Operating temperature |
0°C to 70°C |
