Power Module
- Power modules in a chassis must have the same power and same airflow direction.
- A switch must use the power modules it supports. Using unsupported power module may bring unknown risks to the switch.
- When two power modules work in 1+1 backup mode, you can hot swap one of them.
- When only one power module is installed in a chassis, install a filler panel on the vacant power supply slot.
- Before powering off a switch, turn off both power modules.
- 150 W AC Power Module (PAC-150WA)
- 150 W AC Power Module (ES0W2PSA0150)
- 350 W AC Power Module
- 350 W DC Power Module (PDC-350WA)
- 350 W DC Power Module (PDC350S12)
- 600 W AC Power Module (PAC-600WA)
- 600 W AC Power Module (PAC600S12)
- 600 W AC&240 V DC Power Module
- 600 W AC&240 V DC Power Module (PAC600S12)
- 600 W High-Voltage DC Power Module
- 600 W DC Power Module (PDC600S12)
- 1000 W DC Power Module (PDC1000S12)
- 1200 W AC&240 V DC Power Module (PAC-1K2WA)
- 1200 W High-voltage DC Power Module (PHD-1K2WA)
- 1200 W High-Voltage DC Power Module (PHD1K2S12-DB)
- 1200 W DC Power Module (PDC-1K2WA)