600 W AC Power Module (PAC-600WA)

CloudEngine 8800, 7800, 6800, and 5800 Series Switches Hardware Description (Versions earlier than V200R020C00)

This document provides an overall description of the CE5800&6800&7800&8800 series switches hardware that versions earlier than V200R020C00, helping you obtain detailed information about each chassis, power module, fan module, card, cable, and pluggable modules for ports.

Rate and give feedback:

Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).

600 W AC Power Module (PAC-600WA)

Version Mapping

600 W AC power modules include PAC-600WA-B (B: back-to-front airflow, air exhaust on power module panel) and PAC-600WA-F (F: front-to-back airflow, air intake on power module panel).

Table 3-21 describes the mapping between switch models and 600 W AC power modules.

Table 3-21 Version mapping

Switch Model	PAC-600WA-B	PAC-600WA-F
CE6850-48T4Q-EI	Supported in V100R002C00 version and later versions	Supported in V100R002C00 version and later versions
CE6810-48S4Q-EI CE7850-32Q-EI	Supported in V100R003C00 version and later versions	Supported in V100R003C00 version and later versions
CE6810-48S4Q-LI CE6810-48S-LI	Supported in V100R003C10 version and later versions	Supported in V100R003C10 version and later versions
CE6810-32T16S4Q-LI CE6810-24S2Q-LI CE6851-48S6Q-HI	Supported in V100R005C10 version and later versions	Supported in V100R005C10 version and later versions
CE6855-48S6Q-HI CE6870-24S6CQ-EI CE6870-48S6CQ-EI CE7855-32Q-EI	Supported in V200R001C00 version and later versions	Supported in V200R001C00 version and later versions
CE6856-48S6Q-HI CE6860-48S8CQ-EI CE6880-24S4Q2CQ-EI CE6880-48S4Q2CQ-EI CE6880-48T4Q2CQ-EI CE6870-48T6CQ-EI CE8850-32CQ-EI	Supported in V200R002C50 version and later versions	Supported in V200R002C50 version and later versions
CE6865-48S8CQ-EI	Supported in V200R005C00 version and later versions	Supported in V200R005C00 version and later versions
CE5880-48T6Q-EI	Supported in V200R005C10 version and later versions	Supported in V200R005C10 version and later versions
Other models	Not supported	Not supported

Appearance

Figure 3-17 shows the appearance of a PAC-600WA-B power module, and Figure 3-18 shows the appearance of a PAC-600WA-F power module.

Figure 3-17 PAC-600WA-B power module

Figure 3-18 PAC-600WA-F power module

Function

PAC-600WA-B and PAC-600WA-F power modules use different airflow designs but have the same functions. Table 3-22 describes the functions of a 600 W AC power module.

Table 3-22 Functions of a 600 W AC power module

Function		Description
Input protection	Input undervoltage protection	In this protection state, the power module stops supplying power. When the input voltage restores to the normal range, the power module automatically resumes power supply.
Input protection	Input overcurrent protection	In this protection state, the power module stops supplying power and cannot automatically resume power supply when the input current restores to the normal range.
Output protection	Output overvoltage protection	In this protection state, the power module supplies power intermittently. When the output voltage restores to the normal range, the power module automatically resumes power supply.
	Output overcurrent protection	In this protection state, the power module supplies power intermittently. When the output current is limited within a range, the power module automatically resumes power supply.
	Output short-circuit protection	In this protection state, the power module supplies power intermittently. When the short circuit is removed, the power module automatically resumes power supply.
Overtemperature protection		When the temperature of the power module exceeds a specified threshold, the power module stops supplying power. When the temperature falls into the normal range, the power module automatically resumes power supply.
Heat dissipation		PAC-600WA-B: back-to-front airflow PAC-600WA-F: front-to-back airflow
Hot swap		Supported

When a power module enters overtemperature protection state, take measures to lower the temperature of the power module. The power module can automatically resume power supply when the temperature falls within the normal range.

Panel

Figure 3-19 and Figure 3-20 show the panels of 600 W AC power modules.

Figure 3-19 PAC-600WA-B panel

Figure 3-20 PAC-600WA-F panel

1. Captive screw	2. Ventilation channel flag : back-to-front airflow : front-to-back airflow	3. Indicator	4. Fan air vent
5. Handle	6. Power switch	7. AC power socket	8. AC terminal locking latch

Table 3-23 describes the indicator on the 600 W AC power module panel.

Table 3-23 Indicator description

Indicator	Color	Status	Description
STATUS: power indicator	Green	Off	The power input is abnormal (for example, no input, overvoltage, or undervoltage) or the power output is abnormal (for example, overvoltage, overcurrent, short-circuit, or overtemperature).
STATUS: power indicator	Green	Steady on	The power module is working normally.

Specifications

Table 3-24 lists technical specifications of 600 W AC power modules.

Table 3-24 Technical specifications of 600 W AC power modules

Item	PAC-600WA-B	PAC-600WA-F
Dimensions (W x D x H)	100 mm x 205 mm x 40 mm (3.9 in. x 8.1 in. x 1.6 in.)
Weight	1 kg (2.20 lb)
Rated input voltage	100 V AC-240 V AC, 50/60 Hz
Maximum input voltage	90 V AC-290 V AC, 47 Hz-63 Hz
Rated input current	9 A
Rated output current	50 A
Rated output voltage	12 V
Rated output power	600 W
Part Number	02310PMH	02310PMJ

Translation

简体中文

Download

Updated: 2021-06-01

Document ID: EDOC1000019246

Downloads: 10104

Average rating:

This Document Applies to these Products

Related Version

Digital Signature File

Digital Signature Authentication Mode