600 W High-Voltage DC Power Module

CloudEngine 8800, 7800, 6800, and 5800 Series Switches Hardware Description (Versions earlier than V200R020C00)

This document provides an overall description of the CE5800&6800&7800&8800 series switches hardware that versions earlier than V200R020C00, helping you obtain detailed information about each chassis, power module, fan module, card, cable, and pluggable modules for ports.

Rate and give feedback:

Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).

600 W High-Voltage DC Power Module

Version Mapping

600 W high-voltage DC power modules are classified into two types depending on the airflow designs: PHD-600WA-B (back-to-front airflow, air exhaust on power module panel) and PHD-600WA-F (F: front-to-back airflow, air intake on power module panel).

Table 3-37 describes the mapping between switch models and 600 W high-voltage DC power modules.

Table 3-37 Version mapping

Switch Model	PHD-600WA-B	PHD-600WA-F
CE6850-48S6Q-HI	Supported in V100R005C00 and later versions	Supported in V100R005C00 and later versions
CE6850U-48S6Q-HI CE6850-48T6Q-HI CE6850U-24S2Q-HI	Supported in V100R005C10 and later versions	Supported in V100R005C10 and later versions
CE6855-48T6Q-HI	Supported in V200R001C00 and later versions	Supported in V200R001C00 and later versions
CE6856-48T6Q-HI	Supported in V200R002C50 and later versions	Supported in V200R002C50 and later versions
CE6875-48S4CQ-EI	Supported in V200R003C00 and later versions	Supported in V200R003C00 and later versions

Appearance

Figure 3-33 shows the appearance of a PHD-600WA-B power module, and Figure 3-34 shows the appearance of a PHD-600WA-F power module.

Figure 3-33 PHD-600WA-B power module

Figure 3-34 PHD-600WA-F power module

Function

PHD-600WA-B and PHD-600WA-F power modules use different airflow designs but have the same functions. Table 3-38 describes the functions of them.

Table 3-38 Functions of 600 W high-voltage DC power modules

Function		Description
Input protection	Input overvoltage protection and undervoltage protection	In either of the two protection states, the power module stops supplying power. When the input voltage restores to the normal range, the power module automatically resumes power supply.
Input protection	Input overcurrent protection	In this protection state, the power module stops supplying power and cannot automatically resume power supply when the input current restores to the normal range.
Output protection	Output overvoltage protection	In this protection state, the power module stops supplying power intermittently. When the system recovers from output overvoltage, the power module automatically resumes power supply.
	Output overcurrent protection	In this protection state, the power module supplies power intermittently. When the output current is limited within a range, the power module automatically resumes power supply.
	Output short-circuit protection	In this protection state, the power module supplies power intermittently. When the short circuit is removed, the power module automatically resumes power supply.
Overtemperature protection		When the temperature of the power module exceeds a specified threshold, the power module stops supplying power. When the temperature falls into the normal range, the power module automatically resumes power supply.
Heat dissipation		PHD-600WA-B: back-to-front airflow PHD-600WA-F: front-to-back airflow
Hot swap		Supported

When a power module enters overtemperature protection state, take measures to lower the ambient temperature. The power module can automatically resume power supply when the temperature falls within the normal range.

Panel

Figure 3-35 and Figure 3-36 show the panels of 600 W high-voltage DC power modules.

Figure 3-35 PHD-600WA-B panel

Figure 3-36 PHD-600WA-F panel

1. Lock	2. Indicator	3. Fan air vent	4. Handle NOTE: Each 600 W high-voltage DC power module is delivered with a velcro strap on the handle. This velcro strap is used to bundle the power cable to the handle.
5. Airflow flag : back-to-front airflow : front-to-back airflow	6. Power socket	-	-

Table 3-39 describes the indicator on a 600 W high-voltage DC power module panel.

Table 3-39 Indicator description

Indicator	Color	Status	Description
STAT: running status indicator	Green	Off	The power module receives no power input.
		Steady on	The power module is working normally.
		Blinking	The power module is in loading or standby state, or the power cable has been connected but the power module is not installed in the switch.
	Red	Steady on	Fans of the power module fail. The power module is in overtemperature protection state. The power input is abnormal (input undervoltage or input overvoltage). The power output is abnormal (output overcurrent, output short-circuit, or output overvoltage).

Specifications

Table 3-40 lists technical specifications of 600 W high-voltage DC power modules.

The PHD-600WA series are no longer sold since August 10, 2018.

Table 3-40 Technical specifications

Item	PHD-600WA-B	PHD-600WA-F
Dimensions (W x D x H)	66.0 mm x 340.0 mm x 39.6 mm (2.6 in. x 13.4 in. x 1.6 in.)
Weight	1.5 kg (3.31 lb)
Rated voltage range of 380 V high-voltage DC power input	240 V DC to 380 V DC
Maximum voltage range of 380 V high-voltage DC power input	188 V DC to 400 V DC
Rated input current	4 A
Rated output current	50 A
Rated output voltage	12 V
Rated output power	600 W
Part Number	02310YQQ	02310YQR

Translation

简体中文

Download

Updated: 2021-06-01

Document ID: EDOC1000019246

Downloads: 10104

Average rating:

This Document Applies to these Products

Related Version

Digital Signature File

Digital Signature Authentication Mode