Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring PXE
- On the Emulex BIOS setting page, select the NIC, FCoE, or iSCSI mode.Figure 4-12 Setting a working mode
- Save the setting.Figure 4-13 Saving the mode configuration
- Select Continue and press Enter. The port configuration screen is displayed.Figure 4-14 Opening the screen for configuring ports
- Select Port0 or Port1, and press Enter. The MultiChannel Configuration or Port Configuration screen is displayed.
If UMC is disabled, the Port Configuration screen is displayed. If UMC is enabled, the MultiChannel Configuration screen is displayed.
Figure 4-15 Selecting a port - On either screen, enable PXE.
Figure 4-16 shows how to enable PXE when UMC is disabled.
Figure 4-17 shows how to enable PXE when UMC is enabled.
- (Optional) Configure the VLAN ID and priority for PXE.Figure 4-18 Configuring the VLAN ID and priority for PXE
- Select Save and press Enter to save the PXE VLAN settings.Figure 4-19 Saving PXE configurations
