No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CH242 Compute Node V100R001 User Guide 15

This document describes the appearance, functions, structure, and installation, removal, and configuration methods of the CH242 compute node.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

This document describes the appearance, functions, structure, and installation, removal, and configuration methods of the CH242 compute node.

It provides guidance on how to replace internal components, configure startup options, redundant arrays of independent disks (RAIDs), and IP addresses for the integrated management modules (iMana 200) on the server, log in to the web user interface (WebUI), and install the OS.

Intended Audience

This document is intended for:

  • Technical support engineers
  • Installation and commissioning engineers
  • Field maintenance engineers
  • System maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Issue

Date

Description

15

2019-08-12

This issue is the fifteenth official release.

14

2017-12-28

Erasing Storage Media Data is added.

13

2017-01-18

This issue is the thirteenth official release.

12

2016-08-05

This issue is the twelfth official release.

11

2016-03-31

This issue is the eleventh official release.

10

2015-10-19

09

2015-02-16

The table in Hardware Structure is updated.

08

2014-11-10

07

2014-09-15

  • "Tecal" is deleted from the document name and content.
  • Maximum power consumption and Altitude in Technical Specifications are updated.
  • Hardware Structure is updated, USB 2.0 port is added to the component figure and description.

06

2014-07-30

05

2014-05-13

The content for Display adapter is added to Technical Specifications.

04

2014-02-28

03

2014-01-01

The content in Technical Specifications is modified.

Modified steps in Changing the Default iMana 200 User Password.

Steps for the MM910 of versions later than (U54) 2.20 are added, and the following topics are modified:

02

2013-11-18

The following topics are added to "Common Operations":

The content in Logical Architecture is modified.

In "Checking the CH242", the method for logging in to the MM910 command-line interface (CLI) is changed from over a serial port to over a network port.

01

2013-08-30

This issue is the first official release.

Translation
Download
Updated: 2019-08-16

Document ID: EDOC1000028090

Views: 7124

Downloads: 416

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next